So these are a blank replacement to build off for some new Proton Jumbuck or Proton Arena Tail Lights. Or of you want, just print them out as blanks and send it with no tail lights. I had to get rid of the nubs on the back, as they are so fiddly to print, and if the layer lines are in the wrong spot, they snap off and now you have to try and get a piece of plastic out of the taillight housing that is jammed in there. I have included the F3D file so that you can use these as a base to match to locally sourced lights, my personal preference is Narva brand, but depending on where you are in the world, you may have a better option. Remember, for Australians, you have to comply with ADR6/00 and ADR13/00 as laws, which are found at: https://www.infrastructure.gov.au/infrastructure-transport-vehicles/vehicles/vehicle-design-regulation/australian-design-rules/third-edition