This is a 5x1x3 Gridfinity bin designed to hold any tubular item up to 16mm in diameter and 208mm in length and still be stackable. I designed this with the Xaomi Wowstick and its tubular bit holders in mind as I couldn't find other designs this compact, but it will work with any sort of bulky designer pen or paint markers that exceed standard Sharpie dimensions. Accommodating a 16mm diameter item in 21mm space was no small task, and as such the channels overlap with the Gridfinity base a tiny bit causing some small holes in the bottom of the print, but rest assured as stackability is still maintained.

EDIT: For whatever reason, the model looks strangely smoothed-out in the preview, but if you download and open in your slicer software it looks just fine. 

Gridfinity Wowstick,Marker Stackable Bin - 5x1x3

This is a 5x1x3 Gridfinity bin designed to hold any tubular item up to 16mm in diameter and 208mm in length and still be stackable. I designed this with the Xaomi Wowstick and its tubular bit holders in mind as I couldn't find other designs this compact, but it will work with any sort of bulky designer pen or paint markers that exceed standard Sharpie dimensions. Accommodating a 16mm diameter item in 21mm space was no small task, and as such the channels overlap with the Gridfinity base a tiny bit causing some small holes in the bottom of the print, but rest assured as stackability is still maintained.

Tired of holding your balls in a sack? Like an animal? Or worse! In your bare hands? Introducing the Hextraction Tile Ball Holder!

This ball holder utilities the form factor of a standard game tile for no other purpose than aesthetic consistency. It is not intended to be used as a playable game piece, but it will fit on the game board all the same. This design holds about 50+ balls with a little ball balcony for easy ball grabbing. A ballcony!

This newest version has been redesigned to no longer need any support material. 

Hextraction Tile Ball Holder

Tired of holding your balls in a sack? Like an animal? Or worse! In your bare hands? Introducing the Hextraction Tile Ball Holder!

This ball holder utilities the form factor of a standard game tile for no other purpose than aesthetic consistency. It is not intended to be used as a playable game piece, but it will fit on the game board all the same. This design holds about 25 balls with a little ball balcony for easy ball grabbing. Balls!

Please print this this with support material for areas touching the buildplate (but not everywhere or you will fill up the spiral), I made no considerations for the little ballcony in my design.

This is a revision of [this design](https://www.printables.com/model/462055) on Pritables, but I don't have an account over there and I'm not about to make one. Kieran's design was for a 12oz can, my revision just adds some length to accommodate standard US 16oz beer and energy drink cans.

Why do we bike? To have a beer at the end, that's why. But isn't it a pain to not have a designated holder for your beers for quick access? We should be able to enjoy a warm, shaken up can of 9% double IPA (locally sourced) at a moment's notice. 

Introducing the bike mount can clip, 16oz edition. This is designed to attach to any standard spacing water bottle cage mount on a bicycle, but as shown in the pictures it can also be attached to the fork.

I would recommend printing on its side, no support material, 30% infill. I tried printing on its back on the first attempt and the layer line placement caused the lower tab to snap right off.

Bike Can Clip - 16oz

Bike Can Clip - 16oz v0.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Scoot3r

Achievements

Seedling

Novice Maker

Trailblazer

Up and Coming