Don't forget to ❤️, add to a collection, and follow SUNA for more fun creations! Kitchen scale covers made to fit a common consumer digital scale, like this one. If you happen to own the same or similar kitchen scale, then enjoy these upgraded trays! There are two small cover versions, one with a pour spout and one without. There is a larger cover to enclose the smaller cover and the rest of scale. The smaller covers have the Shippo pattern and the large cover has a hex pattern.

Dimensions:

• Small Plain Cover: 105 x 105 x 10 mm (~4.1 x 4.1 x .4 in)
• Small Cover w/ Spout: 119 x 105 x 10 mm (~4.7 x 4.1 x .4 in)
• Large Cover: 131 x 109 x 23 mm (~5.2 x 4.3 x .9 in)

Weight:

• Small Plain Cover: ~25g
• Small Cover w/ Spout: ~25g
• Large Cover: ~47g

PRINTING:

• Clean your build plate! "Flat" models like this are more likely to shrink and peel up.
• Print design face down
• Print 0.2 layer height, at least 5 bottom & top shell layers, 4 walls, & infill won't matter
• Recommend fuzzy skin on larger tray only (see 3mf file):
  • set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness

‼️ All models are the exclusive intellectual property of SUNA. SUNA models are protected under applicable copyright laws and international treaties. Unauthorized sharing, distribution, reproduction, or sale of these models in any form is strictly prohibited.

Users are granted limited rights to download and use models for personal, non-commercial purposes only. Any commercial use of these models, including but not limited to selling, modifying for sale, or redistribution, is strictly forbidden unless the user subscribes to a valid Thangs license with Commercial Rights.