I designed this for a project that i need to make a presentation for investors. Its a realy simple model where i can use two screw to fix this on a metal surface, to hiden the cables and connection.
Works on any 22mm Swich knob, button, emergency button or Leds. Already include a cable exit for easy instalation.

The designe was made for a M3 screw.
Print this upside down so none supports are needed.
Realy strong and reliable print.
I designe this using SolidWorks, if you want the Solid file, just message me and i will be happy to share with you.

22mm Button enclosure(No supports, easy print)

Button Enclosure.STL

This is a simple arm i made for hold a industrial camera system for one project. This a very reliable print for hold a realy expansive camera. Sinse i not able to fount a similar arm, i designe this in SolidWorks for my project. If you want the solidworks files, please message me.

I use M3 screws and M3 nuts for this project.

I also use my Wing nut designe for easy adjustment.

Flexible Arm (multi purpose)

Base.STL

Just a simple, but reliable Wing Nut for a M3 Nut.

Wing Nut

Easy to use and print. Works well without any nut, but if you use a M3 nut, its a lot more reliable.

WingNut.STL

Holder for hold a number o cables. I make this model on SolidWorks 2019. SolidWorks file is attached for anyone edit.

Use doble sided tape to fix this on any flat surface.

There are 3 files:

Usb holder: only one single holder
Usb holder 3 merged: three usb holder merged
Usb holder 5 merged: five usb holder merged
This is a very resistant print, more reliable than others models that i found on the internet. Thats is important for me, because i put this on the back of my desk, and often i push against the wall, whats make others models brake apart realy easily.

Usb Cable Holder

Holder for hold a number of cables. I make this model on SolidWorks 2019. SolidWorks file is attached for anyone edit.

Use doble sided tape to fix this on any flat surface.

There are 3 files:

Usb holder: only one single holder
Usb holder 3 merged: three usb holder merged
Usb holder 5 merged: five usb holder merged
This is a very resistant print, more reliable than others models that i found on the internet. Thats is important for me, because i put this on the back of my desk, and often i push against the wall, whats make others models brake apart realy easily.

Usb Holder.STL

Usb_Holder_3_merged.SLDPRT

Usb_Holder_5_merged.SLDPRT

Usb_Holder.SLDPRT

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

Robusta Automações

22mm Button enclosure(No supports, easy print)

Flexible Arm (multi purpose)

Wing Nut

Usb Cable Holder