R
R

20mm MFT Hole Plug with Captive Washer v4.3mf

by
RobDlg
RobDlg
Follow
R
RobDlg
|
Image 3 of 4
20mm MFT Hole Plug with Captive Washer v4.3mf 3d model
R
RobDlg
|
Image 3 of 4
20mm MFT Hole Plug with Captive Washer v4.3mf 3d model
2D
3D
Makes
20mm MFT Hole Plug with Captive Washer v4.3mf 3d model
20mm MFT Hole Plug with Captive Washer v4.3mf 3d model
20mm MFT Hole Plug with Captive Washer v4.3mf 3d model
20mm MFT Hole Plug with Captive Washer v4.3mf 3d model

20mm MFT Hole Plug with Captive Washer v4.3mf

A simple 20mm MFT plug with a captive SAE 1/4" ID and 5/8" OD washer (used Hillman 35010). The 3MF file is for the BAMBU X1C with 50 plugs already laid out. If you use the STL or better the STP, insert a pause in the slicer at layer 23 or so. Printed with PETG with a 0.20 mm layer height and a 0.4 nozzle. Plugs are easy to remove with a magnet!


0 Likes1 DownloadsDecember 23, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPETG
Layer height0.2 mm
Infill density15 %
SupportsNone
BrimYes
Nozzle size0.4 mm

Render • Fusion

SoftwareFusion