This pair of glasses is an easy-to-wear mask with built-in glasses with temples and a bridge for your nose to sit on. Thus, there is no need to get a string or anything else, as everything you need will be included in the printed model.

There is a version where the eyes and mandibles are complete pieces and one where the tips of the mandibles and eyes are separate. The separate version is for anyone who wants to print each of those pieces in different colors and avoid large multi-color prints. These pieces can be glued in place later. The eyes have close tolerances, so they must be rotated just right to sit in place for gluing.

The hexagons are meant to be glued between the mandibles and the top, allowing both to be appropriately aligned.

(The models labeled top spider mask and bottom are the version where the eyes and mandibles are all one piece. The model labeled no eyes is the version with the eyes removed, and the models tagged left mandible, right mandible, and mandible points are intended for this version)

(.3mf files are included for Bambu Labs AMS users.)

🚨🚨🚨🚨🚨🚨

This model is for personal use only. If you want to sell physical prints of our designs, or you want to support us, please SUBSCRIBE TO OUR THANGS MEMBERSHIP PLAN : https://than.gs/u/161490?plans=true

🚨🚨🚨🚨🚨🚨

Print Settings: Layer Height: .16 or lower .1 would be best.

Support: supports are built into the design and will be printed under the arms of the glasses. These supports should break free with a light snap. You will likely need to reduce your layer height if they do not.

If you print the version where the eyes are separate from the glasses, they must be printed, floating midair with support due to their curvature. I recommend using your slicer's automatic tool for orientation.

HalloweenWearable #HalloweenWearable