A simple yet effective way to store and organize 60 of your Army Painter paint bottles.

This should be fine for others, the diameter is 26mm

Print:
- 1x base
- 1x top
- 2x montant
- 2x traverse
- 5x support

Use some glue to glue the "montant", "base" and "traverse" together. You can simply mount the "support" then. Do not mount them holes aligned, but alternate!

The Army Painter 60 bottles holder

support_x5.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3089561.

This is a traditional japanese puzzle box / secret box based on the instructions I found on

https://app.box.com/s/kkwpxwaxgl6cu0ddkuafadge7xuu9n07

Originally meant to be wood, a 3D print fits perfectly. I have contacted the author and have his approval to create the 3D models and post them here on Thingiverse.

I added the ornaments for every sides.

The dimensions proposed here are 96mmx96mm leaving you with a center space, for your treasure, of 40x32mm and 64mm height.

The default proposed files are at **exact** dimensions, because the ancient Japanese puzzle boxes were a very precise hand work. You **will need some filling and sanding** to fit all the pieces correctly together. The aim is that nothing moves by itself, that the user needs a slight force to push the sides.

As I don't know how exact your printer is and how motivated you are, I also included a zip containing fitted parts. They have 0.2mm less on every sides that should glide, thus requiring less fitting after printing. Only the bottom and top parts are fitted, the side parts are the same!

Each version comes with every parts doubled, one having the carvings for the ornaments and the other without

For opening and closing instructions, you can either check [my video](https://youtu.be/edVAVdei3cY) or the pdf document

I do hope you enjoy this box and my work

Stay tuned, as I'm actually designing the next one, the Chines Dragon box

Japanese puzzle box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4785900.

This is an adapter for the [Keymitt smart lock](https://www.keymitt.com/)

It's designed to fit Swiss Kaba 1519 locks, with a Knob on the inside and a 2mm face plate.

Keymitt

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3073181.

I made this pot after printing this wonderful rose found on Thingiverse: https://www.thingiverse.com/thing:2075824

I didn't want to have a bare pot, so I added this other beautiful rose: https://www.thingiverse.com/thing:885708

These items are not included here and you are free to use the pot for anything else too!


This pot comes with an earth looking piece. No glue required, should just go nicely in the pot and stay there with just a little pressure

Flower pot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3440278.

Why this extruder? Velleman's K8800 printer comes with an extruder and says being ready for TPU printing. If you ever tried Ninjaflex with it.... Well, you won't be able to. Flexible filaments need very tight leading or the will roll on the pushing wheel resulting in extruder blockage and print failure. The original filament detector is very unreliable as well, and using this endstop technique provides with a very reliable solution. The original mounting solution is also not very clever as you need to unmount the whole extruder, stepper included to change anything. This solution makes the extruder easy to remove and replace.

Enjoy printing not only soft/flexible filaments but also any other 1.75mm filament with this extruder upgrade!

Vertex Delta Upgraded extruder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3066846.

Yeah, another spool holder, I just wanted to make mine and have it chainable, simply.

It differs from some others because I chose the have the spool be inside the holder rather than the commonly seen outside setup. It can accomodate

As you see on the picture, I made some filament storage previously. The aim is to replace the tube version of the storage with these chained holders, makes it easier to replace an empty spool in the middle of the storage!

It is meant to be as low as possible, this is why it is that long

Length: 148mm
Width: 78mm
Height: 25mm

For spool of minimum width: 46mm and maximum width of 57mm

Needed are 4 bearings:
- Outer: 22mm
- Inner: 8mm
- Height: 7mm

Included in the file is a **spool object, do not print it!** It is meant to be usefull for you in case you need to edit the spool holder and save you the time to design a spool.


https://youtu.be/BbW79Mn2jko

Yet another spool holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3469950.

This is my own version of the Vertex Delta sleds. It is based on the stock ones visual but made from scratch in blender.

The purpose of these sleds is to modify your printer and use linear bearings instead of the brass bushings.

The reasons behind:
- Better adjustement
- No more fine oil on the rods but use of bearing grease
- Better precision

You will need 12 zip ties. The design is meant to accomodate electrical zip ties that are 2.5mm in width and 1mm thick. I use the 100mm in length ones

This is yet another iteration of the sleds, yes, but it's meant for a finished piece without settings or whatever. If your printer is well calibrated you can just print this and mount them, without any post printing operations

Vertex Delta LM10UU sled

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3034334.

This is the casing for my Velux mod to enable voice control over your roof windows, using Snips on a main unit!

Find more informations about this on my website: https://laurentchervet.wordpress.com/2018/06/21/velux-pcb-hack-done

Or on Hackster: https://www.hackster.io/psychokiller1888/voice-control-for-velux-49aee7
Hackaday: https://hackaday.io/project/159223-voice-control-for-velux

The connector part is used to bring both cover part together. The base part is printed at once and assembled after printing

Velux mod casing

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3068419.

The Velleman Vertex Delta 3d K8800 comes with a filament spool holder on its top, laying position, with direct filament injection. Not only is that destroying the extruder entrance very fast when using more abrasive filaments (Wood, metal), but it also messes up with the filament end detector that goes crazy, as it detects the filament by being pressed down, but the filament comes from up... So you'll end up with a lot of false positive, even with high precision filament.

I have many different filament brands and spools. For them I have built some airtight storage boxes. Working great but nothing to hold the tube on the printer! So I made this little extension, that clips on the printer itself, no need for holes on your babe. The tube fast plug is purposely a bit lower than what it should, forcing the filament to enter the extruder a few milimeters lower, ensuring the filament detector is always pressed when there's some filament

As the printer's top plate is not finished after but only cut, the width might be different, so make sur to measure it correctly and adjust the model accordingly before printing! Mine is 85.87mm. It is printed a bit longer so it fits.

Enjoy!

Vertex Delta 3D extruder upgrade

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3442983.

The Vertex Delta from Velleman comes with very unusual and deceitfull belt pulleys. Basically 3 bearings on an M5 screw. The belt tension applies a force on the M5 forcing the belt to slowly move back and forth on the bearings and inevitably, even with the best aligning and tensioning, you will end up with the belt jumping out as nothing ensures it to stay.

The stock pulleys are very hard to tighten and it's hard to apply tension to the belts because of the way it's made.

Here comes the pulley upgrade!

Simply print three of those, unmount the stock pulleys, keep everything and use it to make this pulleys. You'll need to buy 9x M8 bolts and some M8 threaded shaft

Vertex Delta Belt pulley upgrade

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Psychokiller1888

Achievements

Seedling

Debutant