🔧 Piston engine model 🔧

If you like what you see, feel free to support me becoming a member. More models to come in the future. Join now and enjoy ALL my published designs forever! Check my IG for what is coming next

About this model:

Amazing High quality model of a sliced V8 engine. The engine shows only 2 of the 8 pistons in order to see from the frontal part how the movement of the pistons are inside of a real engine. The crankshaft moves with a lever attached to it at the back making the pistons go up and down. Model has tight fit on all of the parts for a perfect finish, specially between the pistons and the block. This can be used as a decoration item or to explain how an engine works!

Printing settings:

• MODEL IS SCALABLE. It just depends on how big you want the final product to be. I printed mine at 50% and ended up being amazing.
• Layer height: 0.2 mm or less for a higher quality
• Supports: Some of the parts may need supports because of the arches in STL 3.2 or overhangs in STL 3.1. Check your settings on supports and tweak it if needed (I did not use them since i printed with the fan at 100% and at a slow er speed setting).
• Adhesion: No need of extra adhesion for any of the STLs.
• Infill: 10% is more than enough.

Additional information:

• Model comes with a Wrench to tight all of the nuts
• Use the pictures provided as instructions and contact me if more info is needed via DM on IG). Use quick glue to assemble the parts to make sure it does not move!

ALL FILES ARE PROTECTED FROM COMMERCIAL LICENCE