PC4-M10 PTFE pass through - 45°

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5516500.

Model has been moved to Printables.com:

• https://www.printables.com/model/153611

I have a small workspace, the only way to neatly send the filament to the buffer/printer is through the shelf…

• Drill a 4mm (or a bit more) through the shelf (use 3D piece as a guide can help)
• Join the two pieces, upper and under with the PTFE tube
• Check that filament pass through with minimum resistance
• Screw 3D pieces in place
• Voilà !

Design notes:

• “upper” and "under" have different screw positioning so: Screws can be access via same side of the plank/shelf. Screw will not meet each other inside the wood plank.
• Print without support @0.2mm layer
• Very easy to screw the PC4m10 (from remix)

Hope it helps,