***Please Read Description***

I’ve wanted to make a lamp that was unlike any other lamp out there in our reality. The Reveal came from wanting to put movement into light -adding in mechanisms to interact with light. At the same time, my wife wanted a light that could be dimmed so we could wind down before bed and for night feeding our newborn baby. This lamp was designed from both a need and a desire to create something for you and I to enjoy.

This lamp combines 3d printing and metal hardware for strength and stability. The movement is contagious, perfect for fidgeting leaving you mesmerized by the casting of light and shadow.

The tallest part is 210 mm tall. Take into consideration your printers Z height. 

The longest parts are the fins. They are 217.5 mm long. Minimum size of build plate: 177 mm X 177 mm. They would be printed diagonally.

Every other part could be printed on a 177 mm X 177 mm build plate.

Included:

All STL files needed to print the lamp.
A PDF instruction manual with parts list, hardware list and some print instructions for the tricky bits.
A tutorial video.

Dimensions:
Height: 12.25 inches (311.15 mm)
Fins open width: 6.5 inches (165.1 mm)
Fins closed width: 5.5 inches (139.7 mm)

These files are not for resale.

Reveal Original

Main Diffuser.stl

The Ember Original lamp was initially an experiment -exploring how light interacts upon the negative space built into The Ember design. We had no idea how it would look like as a lamp, but as soon as we turned it on for the first time we felt peace and warmth radiate from this simple lamp. This lamp truly creates a calming atmosphere in any room.

The Diffuser:
Height is 220 mm. Print in PETG 
Vase Mode 
Layer Height: .2 mm or .3 mm.
Bottom Layers: 4-5

The Base:
 Can be printed on as small as Prusa Mini (177.8 mm). 
Print in PLA or PETG
Layer Height: .2 or .3 mm
Infill: 15-20%

A simple and modern design, the cube is here to bring personality to your space. It was made during our era of playing with shapes, woven textures and how light dances through it all. This perfect little lamp is an awesome additional light source that brings a large amount of joy in a small amount of space.

Diffuser: 
Print in PETG in VASE MODE.
Layer Height: .3 mm 

Base:
Print in PLA
Layer Height: .2 mm 
Infill: 15-25% 

Hardware: 3 - 1/2 in. (12.7 mm) #8 Pan Socket Head Wood Screws

Dimensions:
Height: 10 inches (254 mm)
Width: 6 inches (152.4 mm)

Original Ember

WILD SHADE.stl

**For personal use only. **

It's a nuclear reactor! It's a vacuum cleaner filter! It's a turbine! No it's not the Reveal or Reveal 2.0 either! This is the static version! Where Lord of the Rings and Star Wars meets 3D printing! This is a parametric design that we received from a comment on Instagram! Here you go Mr. U! 

The are 2 versions of this lamp. **Short** and **Tall**! Choice is YOURS!

This lamp is **fully 3D printable**! **No Hardware**! Software (okay, Maybe the slicer) or mediumware!  I really enjoyed designing and printing this one! I hope you do too!

**TOTAL WEIGHT**: 
Short: 600 g 
Tall: 689 g

All the Lamp parts can be printed in PLA.
**Layer Height**: .2 mm  
**Infill**: 15-20%
**Supports**: No

**Diffuser**: Print it in PETG.
Layer Height: .3mm (**No Smaller)
**VASE MODE** 
**Bottom Layers** : 2-4 Layers
 
**Heights**: 
Short: 13 inches (330.2 mm)
Tall: 14 inches (355.6 mm) 
 

The Reveal - Static

Tall Fin.stl

This lamp is our happiest little accident. We wanted to design a slim lamp with a sleek design to fit in thin spaces. We initially designed this lamp to be a regular rectangle, but during the print process, the material started to cascade like fabric, it was beautiful -even more beautiful when lit up. This lamp is, practical, modern and stunning.

Print Settings:
Diffuser: Print in PETG in Vase (Spiral) Mode
Layer height: .3 mm
Bottom Layers: 4-5 

Base: Print in PLA
Layer height: .2  or .3 mm
Infill: 15-20%. more if you want a heavier base.
Supports: No

Hardware: 4 - 1/2 in. (12.7 mm) #8 Pan Socket Head Wood Screws


Dimensions:

Height: 11.81 inches (310 mm)
Width: 11.9 inches (304.5 mm)
Depth: 3 inches  (76.2 mm)

The Wave - Short

The Wave Base.stl

It's a nuclear reactor! It's a vacuum cleaner filter! It's a turbine! No it's not the Reveal or Reveal 2.0 either! This is the static version! Where Lord of the Rings and Star Wars meets 3D printing! This is a parametric design that we received from a comment on Instagram! Here you go Mr. U!  


The are 2 versions of this lamp. Short and Tall! Choice is YOURS!

*****THIS LAMP HAS 12 Fins.*****

**ALWAYS DOUBLE CHECK YOUR PRINT ORIENTATION BEFORE PRINTING!
THE LEGS ARE LABELLED 1 TO 3 AS WELL.**

This lamp is **fully 3D printable**! No Hardware! Software or mediumware!  I really enjoyed designing and printing this one! I hope you do too!


**TOTAL WEIGHT:**   Short: 600  Tall: 689 g

**All the Lamp parts can be printed in PLA**
**Layer Height:** .2 mm 
**Infill:** 15-20%
**Supports:** No 

**Diffuse**r: Print it in PETG.
**Layer Height:** .3mm (**No Smaller)
**VASE MODE**


**Dimensions:**
Short: 13 inches (330.2 mm)
Tall: 14 inches (355.6 mm)
   
 

A simple and modern design, the cube is here to bring personality to your space. It was made during our era of playing with shapes, woven textures and how light dances through it all. This perfect little lamp is an awesome additional light source that brings a large amount of joy in a small amount of space.

Diffuser: 
Print in PETG in VASE MODE.
Layer Height: .3 mm 
Weight:

Base:
Print in PLA
Layer Height: .2 mm 
Infill: 15-25% 

To attach the diffuser to the base, use some super glue to hold it in place.

Dimensions:
Height: 7.5 inches (190.5 mm)
Width: 6 inches (152.4 mm) 
Depth: 6 inches (152.4 mm)


Carbon

Carbon Base.stl

The Original Ember

WILD Base.stl

***Please Read Description*** 

It's a nuclear reactor! It's a vacuum cleaner filter! It's a turbine! No, it's REVEAL 2.0! Where Lord of the Rings and Star Wars meets 3D printing, this second version of The Reveal is a fun take on the original design. The 2.0 has same mechanisms that allow you to brighten or dim your lamp and fidget to your hearts content.

This lamp combines 3d printing and metal hardware for strength and stability. The movement is contagious, perfect for fidgeting leaving you mesmerized by the casting of light and shadow.

The tallest part is 210 mm tall. Take into consideration your printers Z height.

The longest parts are the fins. They are 282 mm long. Minimum size of build plate: 210 mm X 210 mm. They would be printed diagonally.

Every other part could be printed on a 177 mm X 177 mm build plate.

Included:

All STL files needed to print the lamp.
A PDF instruction manual with parts list, hardware list and some print instructions for the tricky bits.
A tutorial video.


Dimensions:
Height: 14.375 inches (365.13 mm)
Fins open width: 6.5 inches (165.1 mm)
Fins closed width: 5.5 inches (139.7 mm)

These files are not for resale.

The Reveal 2.0

The Reveal Original

<p dir="ltr"><span style="white-space: pre-wrap;">This is a new fully 3D printed lamp! The Reveal Static!! No Hardware! Just PLA, PETG and print time! This is our way of saying hello on Thangs! We hope you enjoy it! Have a great weekend! </span></p>

 This is a new fully 3D printed lamp! The Reveal Static!! No Hardware! Just PLA, PETG and print time! This is our way of saying hello on Thangs! We hope you enjoy it! Have a great weekend! 

70% OFF LABOR DAY WEEKEND SALE!

- In this plan you will receive access to 2 lamps per month.
- One lamp with movement and the other static.

Personal Use

Here you will have access to 6 of our models, where we will rotate and add new models.
This plan enables you to print and sell the physical lamps in any part of the world you are in!



OHR DESIGN

Select a membership plan

OHR DESIGN

Achievements

Seedling

Designer posts

70% OFF LABOR DAY WEEKEND SALE!

Pinned models

The Reveal - Static

Reveal Original

Original Ember

The Reveal - Static

The Wave - Short

The Reveal - Static

Carbon

The Original Ember

The Reveal 2.0

The Reveal Original