Coffee Filter Wall Mount (#4 and #2 filters)

Preparing coffee should be as smooth as that first sip. This wall mount fits #4 and #2 coffee filters.

Print Recommendations

Print Material: PLA

Infill Percent: 15%

Perimeters: 2

Layer Height: .15 (higher layer heights work just fine, but layers become more visible)

Supports: NONE

Print orientation: Place the top surface against the build plate

Additional Parts Required

Double Sided Tape Required

• Amazon Link to 3M .4 inch double sided tape https://a.co/d/3n44GFr

• This adhesive twists off easily and doesn't leave residue. See last photo for recommended amount and placement.