Kyle W

Hextraction Trapdoor Sinkhole Tile

by
NoStepOnDeez
Follow
Follow
Remix Model
NoStepOnDeez
NoStepOnDeez
|
Image 2 of 5
Hextraction Trapdoor Sinkhole Tile 3d model
NoStepOnDeez
NoStepOnDeez
|
Image 2 of 5
Hextraction Trapdoor Sinkhole Tile 3d model
2D
3D
Makes
Hextraction Trapdoor Sinkhole Tile 3d model
Hextraction Trapdoor Sinkhole Tile 3d model
Hextraction Trapdoor Sinkhole Tile 3d model
Hextraction Trapdoor Sinkhole Tile 3d model
Hextraction Trapdoor Sinkhole Tile 3d model

A tile, with its trigger zone in the gutter, that destroys tiles above it. Activate it by a gutter-ball coming from above or send a ball off of a jump and land in the hole.

Rules Card Text Setup: Fully open the Trapdoor. Trigger: Destroy the previous tile this ball touched.

Print/Assembly Instructions Print either the Single-Part or Base and Trapdoor. I recommend the 2-part so it's the same size as a regular tile.

  • Single Part: Supports required.
  • Mechanical: Click fit the Trapdoor into the base. The star should face the top when closed.

For those that print the SIngle-Part, just ignore the Setup on the Rules Card. I only provided 1 card for simplicity and in case someone wants to print the mechanical version afterwards, they're good to go.

This tile is part of my Disaster Tiles Pack. Check the others out. Cyclone https://thangs.com/m/1069584 Earthquake https://thangs.com/m/1069585 Noah's Ark https://thangs.com/m/1069587 Nuclear https://thangs.com/m/1069592 Tsunami https://thangs.com/m/1031250 Solar Flare https://thangs.com/m/1069626 Volcano https://thangs.com/m/1069633


8 Likes35 DownloadsMay 31, 2024



8 Likes35 DownloadsMay 31, 2024