Kyle W
Kyle W

Hextraction Clock Tile

by
NoStepOnDeez
NoStepOnDeez
Follow
NoStepOnDeez
NoStepOnDeez
|
Image 1 of 7
Hextraction Clock Tile 3d model
NoStepOnDeez
NoStepOnDeez
|
Image 1 of 7
Hextraction Clock Tile 3d model
2D
3D
Makes
Hextraction Clock Tile 3d model
Hextraction Clock Tile 3d model
Hextraction Clock Tile 3d model
Hextraction Clock Tile 3d model
Hextraction Clock Tile 3d model
Hextraction Clock Tile 3d model
Hextraction Clock Tile 3d model

Hextraction Clock Tile

1 tile with 144 orientations. The question is, when do you play it?

Rules Card Text Setup: Set the hands to the current real time, rounding down to the nearest 5 minutes and hour.

Assembly Instructions The hardware used is an M3x16 screw and 3 M3 flat washers.

  • Glue a clock face onto the base. If the face is left unglued, it will shift a few degrees when turning the hands due to the alignment pin clearance.
  • On the screw, stack the hour then the minute hand, placing washers in between each part. Make sure the hand's star faces towards the screw head.
  • Tighten the screw sub-assembly into the base. Tight enough that an incoming ball won't move the hand, but loose enough that a player can move the hands freely. The player typically has to hold both hands when setting the time.

17 Likes91 DownloadsDecember 24, 2023