Madballs Screamin' Meemie

Madballs Screamin' Meemie from the mid 1980's era, 179x179 Hueforge to fit all printer sizes.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 179x179mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.7mm and the Actual Depth is 2.7mm

Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Burly Wood Transmission Distance: 2.5 PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black At layer #8 (0.8mm) swap to Red At layer #15 (1.36mm) swap to Burly Wood At layer #25 (2.16mm) swap to White for the rest.