0 Likes3 DownloadsOctober 8, 2024
Darth Vader Holding Photo Frame of Vaders Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 177.35x179mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 2.6mm
Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #9 (0.88mm) swap to Grey At layer #18 (1.6mm) swap to Silver At layer #26 (2.24mm) swap to White for the rest.
Categories:
0 Likes3 DownloadsOctober 8, 2024
0 Likes3 DownloadsOctober 8, 2024