Al Capone with his Colt 45.
Added Bambu and AnyCubic Files.
During the slice there is a good chunky pause at 25%, but just wait it will happen.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x133.45mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ IIID Max Red Transmission Distance: 4 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.72mm) swap to Red At layer #12 (1.12mm) swap to Pure Yellow At layer #17 (1.52mm) swap to White for the rest.