Jonathan K

Free-Standing Foot

by
Multiboard
Follow
Follow
Remix Model
Multiboard
Multiboard
|
Image 1 of 4
Free-Standing Foot 3d model
Multiboard
Multiboard
|
Image 1 of 4
Free-Standing Foot 3d model
2D
3D
Makes
Free-Standing Foot 3d model
Free-Standing Foot 3d model
Free-Standing Foot 3d model
Free-Standing Foot - Very pointy feet so some mouse ears were necessary for me. When assembled, the feet seem to point a little upwards making the tile rock back and forth so I will go for the feet with screwholes and just add some rubber feet instead. - 3d model
This model is restricted by licensing terms. 

Attach a “free-standing foot” to your Multiboard so it stands by itself, and use it as a desk organizer.

The free-standing foot comes with two pieces: the foot and the support piece.

To set it up, you insert the foot into a hole on the bottom of your Multiboard, then you place the support piece inside the foot to secure it into place.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io


158 Likes5.9K DownloadsDecember 15, 2023



158 Likes5.9K DownloadsDecember 15, 2023
This model is restricted by licensing terms.