Use “Bolt-Lock Mounts” if you want your entire Multiboard or segments of your Multiboard to be easily removable. This version creates an 8 mm offset from the surface.
To set it up…
- Connect your Tiles together using:
- DS Snap Connectors (Part A & Part B) - this will create an 8 mm offset from the wall (look at image 5).
- Or use Regular Snap Connectors - the offset will be less than 8 mm, so to get the 8 mm offset, use Bolt-Lock Mount Washers (look at image 6).
-
Attach the Bolt-Lock Mounts to a surface using screws (with the help of the Installation Tool).
-
Then secure your tiles to the mounts using 13 mm Small Thread Bolts.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Video tutorial on how to print stacks: https://www.youtube.com/watch?v=xs2urfM0MRM
This stack print has been designed specifically for 0.2 mm layer heights. They have a 0.2 mm gap between each print. Make sure that all top surfaces get ironed. As a bonus, set the seam alignment to random for maximum strength.
Apart form that, use the default recommended settings: 3 wall perimeters in wall thickness. 15% infill. No supports are needed. The printing orientation is as provided in the file.
—
This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.
Explore and build the coolest, most adaptable workshop at https://multiboard.io