This bolt has a “big thread” that can screw directly into the Multiboard tiles.

But it’s special because it has a head called “Multihead” that’s larger than other bolts. The Multihead acts the same as the Multiboard tiles, allowing you to insert snaps into the head, and screw in other bolts/rods that have a big thread.

The 13mm thread length enables you to securely join two Multiboard tiles together without the bolt protruding through the other side.

The shaft has a 6.5mm shank, allowing you to connect two Multiboard tiles together and form a press connection between them, without the bolt causing any unintended rotation.

It also has a “push-fit hole” to insert push-fit accessories and screw in bolts/rods that have a mid thread.

Since the head of this bolt is bigger than usual, you can’t place them next to each other when screwed into the tiles.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2mm. It doesn't need printing supports. Use the default 15% infill. Your printer will need to be able to bridge gaps of up to 30mm for some designs.

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io