Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Mimetics3D

Remix Model

Social

Become a member

Makes

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - Second attempt...still not printing correctly. - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - Front folds notmconnecting - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - Ready to take my failed prints to the underworld - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - Also had issues with the cloak, especially in Cura, so I threw it into OrcaSlicer and gratuitously gap filled to get rid of most of the gaps - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - These snap flex joints are absolutely amazing 🤩 - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - Already thinking about setting this lil guy up for Halloween next year 🎃 - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - Came out a bit thin and stringy, but made for a cool effect with the robe - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - Front of cloak not slicing in Cura. and the really thin walls on sleeves are a real nail bitter also, had a few problems with collisions there. Really unfortunate, gives the cloak a really messy look. It is a beautiful model however.

Tried slicing in Prusa, cloak was completed on there, but still the walls look a bit to thin to print nice and smooth ... not gonna try, don't have black filament left at the moment. Would be worth a try. - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - I should have read the comments about the front, but not so bad after all :)
print with x1 carbon at 0.2 in 4h30 - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - My make for the show off contest 😁😁 - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - worked great with no supports . used black pla+ and rainbow silk - 3d model

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints) - Cloak was printed with tree supports and brim, but skull/spine was not. - 3d model

This model is restricted by licensing terms.

View license.

Print-In-Place, No Supports, Articulating Fidget Toy

Arms outstretched, prepared to embrace, the reaper shows his bony face. But do not fear, it's not your time; beneath his cloak, he's just a spine.

This Grim Reaper model is composed of 2 separate pieces. The Reaper Cloak and the Skele-Spine Snap-Flex Fidget.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Skele-Spine to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each SNAP will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Skele-Spine is the fifth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

Tolerance: To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Skele-Spine to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the Medium tolerance model. For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Grim Reaper: https://than.gs/m/949070 Loose Tolerance Grim Reaper: https://than.gs/m/949066

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Print Settings: 0.2mm Layer Height 3 Wall Loops 3 Top Shell Layers No Supports, Print-In-Place at 100% scale. Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear. If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Category:

Pop Culture

Characters

Tags:

443 Likes1.8K DownloadsOctober 21, 2023

This model is restricted by licensing terms.

View license.