Triple Snap Connector Reverse - DS Part B - Standard (0.5) v2.stl

Let's say you put up your part b snaps, without considiring orientation, and simply rotating the original Triple Snap Connector will not work. This one is a reverse of the OG to help you out.

**Printing Guidelines: The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.