Outlet spacers to shim out your electrical outlet for proper cover installation. Great for tiled walls or improperly installed boxes.
Design is 5/8" tall, but the stand offs can be sanded / shaved down to your desired height. The "Cage" of the design is about 3/8" Thick.
CAD STEP included so you can modify the height as well to print shorter.
The two piece design is so you do not have to disconnect the wires from your outlet/switch to install this. Just turn off the breaker/fuse to the circuit, pull it out of the box, clip these around your outlet, and reassemble. May require longer screws depending on thickness and screws you have currently. Single piece design included if you don't need the clip together design.
DISCLAIMER: NOT UL listed. Use at your own risk.
- INCLUDED FILES:
- OutletSpacerPart1 & Part2 (2pcs to clip together)
- OutletSpacerOnePiece (Single Piece Design)
- CAD STEP File (modify for your height needs)
- PRINT PARAMETERS:
- No support Required
- 100% Infill Recommended (So standoffs can be sanded.)
If you like my Designs please consider support my various social medias!
LinkTree: http://www.HotRodHippie.com/links
All of my Designs are covered by a Creative Commons Non-Commercial License. Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality. Unauthorized sales will result in new designs not being made public.
DISCLAIMER: NOT UL listed. Use at your own risk.