Bigger Bricks, Bigger Fun for the Holidays!
Recently I released my “LEt'GO Holiday Wreath” design of modular interlocking block Christmas decorations. Folks wanted to see it bigger, so here we go! This is a 200% scale version of the LEt'GO Wreath, but with proper fitment adjustments made. Just scaling the parts will cause the tolerances to scale up too, this design has corrected for that. These parts should print & fit together just like the smaller design, but at a way bigger size!
A friend requested me to print them one of these, and I wanted to tweak the designs I found online, so I started over from scratch. Some measurements were pulled from one design so I'm call this a “Remix” of the design on Printables by Ferengatar.
Design has “Leaves” that interlock into each other to form the Wreath, and “Studs” that can be printed in whatever color you like to decorate it. All of these parts press fit onto each other tightly enough to not come apart accidentally but still be able to be disassembled easily.
NOTE: Proper tuning & extrusion accuracy is a requirement to produce a good fit. A Test print file is included to ensure you have good results before you start printing the full design. Print the Test Part & one of the “Studs” to check your fitment before diving into the full print!!
Parts Needed (Affiliate Links):
Files Included:
- BIG LE'tGO Holiday Wreath STEP File
- BIG LEt'GO Leaf STL (Print 6+ for Wreath)
- BIG LEt'GO Stud STL (Print as many as you want to decorate with.)
- BIG LEt'GO Test Print (Print w/ 1 Stud to test your fitment accuracy.)
Recommended Print Settings: VERY IMPORANT
- 3 Perimeters
- 15% Infill
- NO Supports Required
- .2mm 1st Layer Height
- .28mm for ALL Other Layers
- ASA Filament Recommended if decorating outside or hanging in a window.
NOTE: This was designed with these exact print paremeters in mind. Using other layer heights may cause fitment issues, change at your own risk.
Want to Support what I do? Check out my social medias please!
Link Tree: http://www.MandicReally.com/linksDesigns covered by a Creative Commons Share-Alike License.
Want to become an Authorized Reseller? Become a Patron on the “Merchant” Tier on my Patreon to begin selling today: https://www.Patreon.com/MandicReally