tracking pixel
Brian H

Monstera Leaf Magnet

by
LoftedGoods
Follow
Follow
Remix Model
LoftedGoods
LoftedGoods
|
Image 2 of 22
Monstera Leaf Magnet 3d model
LoftedGoods
LoftedGoods
|
Image 2 of 22
Monstera Leaf Magnet 3d model
2D
3D
Makes
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet - Super fun to make these, especially with different filaments. - 3d model
Monstera Leaf Magnet - Super fun to make these, especially with different filaments. - 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet - Super fun to make these, especially with different filaments. - 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet - Make a couple tweaks and created a nightlight.  - 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet - Minor tweaks and created this super cute nightlight. 

Used PETG transparent green and white filament. 
Overture Clear Green (PETG)
Overture White (PETG) - 3d model
Monstera Leaf Magnet - Cute! Worked perfectly on my Bambu X1. I'm still getting used to this matte filament (Hatchbox) so the top layer of green isn't as smooth as I'd like. - 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
Monstera Leaf Magnet 3d model
This model is restricted by licensing terms. 

The Monstera leaf is so iconic, who wouldn't want one on their fridge? This is a simple print that would be great for plant people.

This can be a one or two color print. The top layer is .2mm thick, so if using Bambu Studio/OrcaSlicer, all you have to do is paint the veins with a one click fill of the top layer.

I've included two sizes — small (4" - pictured) and large (5")

Supports None needed!

Scaling I wouldn't recommend scaling this one since it perfectly fits the 10x2.3mm magnets.

Orientation Print with the vein side up, magnet side down.

Print Settings *I've included the 3MF if you want to use my settings.

  • .2mm layer height
  • 15% grid infill
  • 2 walls

Filament & Hardware Filament I used for this print: Hatchbox Forest Green PLA & Overture Matte White PLA Magnets: 10x2.3mm Small Round Fridge Magnets

Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/


85 Likes714 DownloadsDecember 1, 2023


85 Likes714 DownloadsDecember 1, 2023
This model is restricted by licensing terms.