Taylor Swift/Travis Kelce (Telce) Valentines Hueforge

*** Please follow the directions below to have a successful print. Colors will vary based upon users choices.***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Protopasta Scarlet Symphany Transmission Distance: 13

Swap Instructions: Start with Black At layer #2 (0.24mm) swap to Red At layer #8 (0.72mm) swap to Jade White At layer #13 (1.12mm) swap to Scarlet Symphany for the rest.