Cute Turtle with Coffee Hueforge

Please follow directions below for a successful print. Colors will be based upon user choice.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Protopasta Bottle Brown Transmission Distance: 15 PETG JAYO White Transmission Distance: 6 PLA Protopasta Soda Green Transmission Distance: 16

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Bottle Brown At layer #13 (1.12mm) swap to White At layer #18 (1.52mm) swap to Soda Green for the rest.