This is a 6mm Ball-Hinge-Ball joint for use in the Substratum figure building system I will utilise in my projects.

It should be simple enough to print but the dowel might be a bit hard to insert at first, this is in order for the joint to be tight.

The ball ends of the joint are 6mm in diameter.

You should print:
1x BallHingeJoint6x6mmPeg
2x BallHingeJoint6x6mmMain 

SUBSTR system 6mm Ball-Hinge-Ball (BHB) joint

BallHingeJoint6x6mmMain.3mf

Highly articulated 3d-printable action figure. The SUBSTRATUM Enid figure is utilising the SUBSTR joint system. This joint system allows for easy interchanging of parts and the vast possibility of creating different
figures. As the second in the line this is a character figure and thus is based on an existing property. It supports  15 points of articulation and 0 accessories.

Joints you should print additionally:

3x 10mm BHB joint ([here](https://thangs.com/designer/Kexana/3d-model/SUBSTR%20system%2010mm%20Ball-Hinge-Ball%20%28BHB%29%20joint-1113036))

6x 15mm BHB joint ([here](https://thangs.com/designer/Kexana/3d-model/SUBSTR%20system%2015mm%20Ball-Hinge-Ball%20%28BHB%29%20joint-1113040))

4x 5m BB joint ([here](https://thangs.com/designer/Kexana/3d-model/SUBSTR%20system%206mm%20Ball-Ball%20%28BB%29%20joint-1113042))

1x proprietary neck joint (in the files here)

These joints can be printed in a rigid plastic like PLA, while the body parts from this page can be printed in a semi-flexible material like TPU/TPE. 

The limb parts should be printed twice once mirrored for the right pair.

The print form the pictures was primed and painted but as I haven't yet tried a way to smooth TPE the layer lines are still visible. 

Substratum OK K.O.! Enid Posable Action Figure SUBSTR 002

Head.3mf

Highly articulated 3d-printable action figure. The SUBSTRATUM PROTOBODY girl is a base figure utilising the SUBSTR joint system. This joint system allows for easy interchanging of parts and the vast possibility of creating different
figures. As the first in the line this is a blank figure and thus is not based on any existing property. It supports  15 points of articulation and 0 accessories.

Joints you should print additionally:

6x 10mm BHB joint ([here](https://thangs.com/designer/Kexana/3d-model/SUBSTR%20system%2010mm%20Ball-Hinge-Ball%20%28BHB%29%20joint-1113036))

3x 15mm BHB joint ([here](https://thangs.com/designer/Kexana/3d-model/SUBSTR%20system%2015mm%20Ball-Hinge-Ball%20%28BHB%29%20joint-1113040))

4x 5m BB joint ([here](https://thangs.com/designer/Kexana/3d-model/SUBSTR%20system%206mm%20Ball-Ball%20%28BB%29%20joint-1113042))

1x proprietary neck joint (in the files here)

These joints can be printed in a rigid plastic like PLA, while the body parts from this page can be printed in a semi-flexible material like TPU/TPE. 

The limb parts should be printed twice once mirrored for the right pair.

Substratum Protobody Girl Posable Action Figure SUBSTR 001

This is a 6mm Ball-Ball joint for use in the Substratum figure building system I will be utilize in my projects.

It should be simple enough to print.

The ball ends of the joint are 6mm in diameter.

SUBSTR system 6mm Ball-Ball (BB) joint

DoubleBallPegSubs.3mf

This is a 15mm Ball-Hinge-Ball joint for use in the Substratum figure building system I will be utilize in my projects.

It should be simple enough to print but the dowel might be a bit hard to insert at first, this is in order for the joint to be tight. This joint is supposed to be ratcheted but depending on the quality of the print might not be :(

The ball ends of the joint are 6mm in diameter.

You should print:
1x BallHingeJoint15x6mmRatchetOnPeg
2x BallHingeJoint15x6mmMain

SUBSTR system 15mm Ball-Hinge-Ball (BHB) joint

BallHingeJoint15x6mmMain.3mf

This is a 10mm Ball-Hinge-Ball joint for use in the Substratum figure building system I will be utilise in my projects.

It should be simple enough to print but the dowel might be a bit hade to insert at first, this is in order for the joint to be tight.

The ball ends of the joint are 6mm in diameter.

You should print:
1x HingeJointBigDowel
2x BallHingeJoint10x6mmMain 

SUBSTR system 10mm Ball-Hinge-Ball (BHB) joint

BallHingeJoint10x6mmMain.3mf

It's Soda from jet set radio future. I modified the game model so that it can interface with revoltech-style universal hinge ball peg joints. 
Such a joint available for 3d printing can be found [here](https://www.thingiverse.com/thing:5390333)

The files: Hand; LowerLeg; LowerArm; UpperLeg; UppeArm; Skate - should be printed two times and the second one should be mirrored.

Kexana

Achievements

Seedling

Debutant

Pinned models

Substratum Protobody Girl Posable Action Figure SUBSTR 001

Substratum OK K.O.! Enid Posable Action Figure SUBSTR 002

SUBSTR system 6mm Ball-Hinge-Ball (BHB) joint

Substratum OK K.O.! Enid Posable Action Figure SUBSTR 002

Substratum Protobody Girl Posable Action Figure SUBSTR 001

SUBSTR system 6mm Ball-Ball (BB) joint

SUBSTR system 15mm Ball-Hinge-Ball (BHB) joint

SUBSTR system 10mm Ball-Hinge-Ball (BHB) joint

Jet Set Radio Future Soda articulated revoltech-style figure