Use a Simple Bin Extension to extend the height of a Multigrid Bin.
This Bin Extension is 1x1 cells and 0.75 units high (48 mm long, 48 mm wide and 42.5 mm high). Stacking a 0.75 units high Extension on a Bin will increase its height by 37.5 mm.
The internal distance between walls is 44x44 mm (although the bottom click rim will make it 38x38 mm). With a Bin Bottom placed inside, the total internal height is 36.5 mm (32.3 mm up to the inner top rim).
Bins Extensions have holes on the bottom corners called “Rim Lock Holes”, they allow you to tightly secure the Bin Extension into place using Rim Lock Pegs.
You can place Bin Bottoms inside of the Bin Extensions to give them a base.
This part comes with four tolerances: loose (0.2 mm), standard (0 mm), tight (-0.2) and permanent (-0.3 mm).
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.
Explore and build the coolest, most adaptable workshop at https://multiboard.io