Kaoz Studios

sunflowers Christmas ornament sun flower wall art

by
KaozKitten
Follow
Follow
Remix Model
KaozKitten
KaozKitten
|
Image 1 of 2
sunflowers Christmas ornament sun flower wall art 3d model
KaozKitten
KaozKitten
|
Image 1 of 2
sunflowers Christmas ornament sun flower wall art 3d model
2D
3D
Makes
sunflowers Christmas ornament sun flower wall art 3d model
sunflowers Christmas ornament sun flower wall art 3d model

Here's a fun lil Lithopane , great for hanging with any light source (christmas tree lights, window, kitchen) Enjoy!

In general : 3D PRINTING SETTINGS Layer Height: 0.1mm - 0.2mm. Smaller is better for detail. Infill: 100%. You want it solid for best light diffusion. Print Speed: Slow it down, around 30-50mm/s for better detail. Nozzle Temperature: This depends on the filament. For PLA, try 200-220C. Bed Temperature: Again, depends on filament. For PLA, try 50-60C. Print Orientation: Vertical. This gives better detail and strength. Nozzle Diameter: Standard is 0.4mm on MK3S. It's fine for lithophanes.

For a 4x6 inch lithophane with a typical thickness of around 3mm, printed vertically, at a layer height of 0.1mm - 0.2mm, 100% infill, and a print speed of 30-50mm/s


7 Likes12 DownloadsNovember 6, 2024