A playful accessory that mimics a mini network hub, designed to hold up to 4 network cables. While it doesn't serve a practical networking purpose, it fits seamlessly into the Gridfinity storage system, making it a great addition for organizing or simply fidgeting with cables.

**If this model helps you, please support me =)**

_How to print:_
Print with the cable holes facing up and supports everywhere.
_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_

Gridfinity Network Cable Fidget Toy

Network Fidget w holes.stl

A big ol drop of.... something. Printed in clear PLA+ with gyroid infill.

**If this model helps you, please support me =)**

_How to print:_
Print vertically with support, but no support on the hole at the top.

_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_

Crystal Teardrop / Raindrop / Monster Drool

Monster Drool 1.stl

A very spooky pumpkin, indeed. In memory of Sarah Wood.

_If this model helps you, please support me =)_

_How to print:_
Scale up to about 4733.13% and use supports everywhere.
_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_

Spooky Tree Jack o' Lantern

Spooky Tree Lantern.stl

A natural-looking scent diffuser for natural scents! Fill it with cedar chips/shavings to make your room smell nice or keep moths away from your clothes. Fill it with potpourri or other fragrances!

**If this model helps you, please support me =)**

_How to print:_
No supports needed!

_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_

Cedar Log Scent Diffuser

Cedar Log Scent Diffuser - LOG.stl

A huge skeleton hand that really bends! Each finger joint features a flexible hinge that bends up, down, and sideways. The joints spring back into place when released. Hang it as a spooky wind chime! Pose the fingers! Use it in a costume!

**If this model helps you, please support me =)**

_How to print:_
Print each bone in a vertical orientation with supports and with support blockers on the inside of the pocket. Print the spring *without* supports.

_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_

Giant Flexy Skeleton Hand

bone-hand.stl

Connects a Timemore C2 coffee bean grinder and a wide-mouth ball jar.

**If this model helps you, please support me =)**

_How to print:_
Print with supports on build plate only
_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_

Timemore C2 to Wide Mouth Jar

timemore-c2-to-mason-jar-Body003.stl

Magnetic Curtain Hanger

blind-holder-Body.stl

He just wants one little nibble, please?

**If this model helps you, please support me =)**

How to print:
Print with supports on the baseplate only. For the small details, make sure to lay the flat side down on the baseplate.

The eyes look great with a multicolor filament! They pop into place, but a little glue will help keep them in. I used hot glue and crazy glue and wish I had some PLA glue instead!
_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_

Cute Halloween Spider

Cute Spider - One Part Only.stl

Replacement gear for your bike bell!

**If this model helps you, please support me =)**

In my case the nut was too tight and caused the teeth to grind together and fail. I had to replace this gear and use loctite to keep the nut in place.

_How to Print:_
I printed this in PLA+ with 100% concentric infill for a stronger gear.

_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_

Bike Bell Gear

BellReplacementGear-Body.stl

It looks like a book, it feels like a book, it's.... a solution to display your e-book covers on your bookshelf! Pulls data from your Goodreads lists, or from a folder of custom book cover images, then displays a slideshow of book covers. Now you can show off your impressive collection of completed ebooks!

**If this model helps you, please support me =)**

_Software:_
Follow the readme here to install the software on your Pi or other device:
[https://gitlab.com/jdsutton/digicover/](https://gitlab.com/jdsutton/digicover/)

_Parts List:_
Raspberry Pi Zero W 2
https://www.ebay.com/itm/296304240222

7" Raspberry Pi Touchscreen
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2332490.m570.l1311&_nkw=raspberry+pi+7+inch+touch+screen&_sacat=0

HDMI to Mini HDMI cable
https://www.ebay.com/itm/314887093866?var=613395018781

HDMI 90 degree adapter
https://www.ebay.com/itm/115925722848

(2x) USB to USB Micro Cable

USB Power Supply (e.g. wall charger)

_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_



Ebook Display Book!

book-insert.stl

A cheeky lil otter! Put lights inside for a glowing effect.

**If this model helps you, please support me =)**

_How to print:_
Supports are needed for the otter's face features, and for the underside of the lid. I used zig-zag supports with no support brim and a lower support density to make them easy to remove. Clean up any irregularities after removing the support for a good fit.

The model is small, I printed it at 2000% scale for a palm-sized pumpkin.
_
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_

Otter face design: https://www.svgrepo.com/svg/314416/otter-solid



Otter Jack-O'-Lantern

pumpkin.stl

Endcap for thick LED strips (6mm x 12mm) eg "5/12/24V Flexible LED Strip Neon Rope Light Tube Party Bar Decor Sign"

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/

If this model helps you, please support me =)


LED Rope Endcap

led-endcap-Body.stl

A model of a 7" raspberry pi touchscreen. Use this to create new models compatible with the touchscreen!

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/

If this model helps you, please support me =)

Raspberry Pi Touchscreen Display 7"

book-case-touch-screen-Pi-Touch-Screen-7in.stl

A faceplate for an electrical junction box housing two toggle switches.

**If this model helps you, please support me =)**

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/

Outlet Box Double Switch Cover

outlet-box-cover-switch-Body.stl

Endcap for Anycubic Kobra 2 - for when you inevitably install Klipper and remove your touchscreen.

Or for any V-slot 40mm x 40mm aluminum extrusion.

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/

Kobra 2 / 40mm Endcap

endcap-Body.stl

USB-powered benchtop power supply.

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/

Teeny Tiny Benchtop Power Supply

mini-power-supply-Body.stl

4-Way Electrical Junction Box (Parametric)

juction-box-Body.stl

Attach a button to the side of your desk! Includes a channel to easily pass through wires. Locks in place with a single screw.

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/

Desk Button Mount (Parametric)

button-mount-Body.stl

Hold water bottles of various sizes! Created to hold a Gatorade bottle. Created in FreeCAD.

**If this model helps you, please support me =)**

_How to Print:_
Print in a vertical orientation with 30% cross infill and with supports on the buildplate.

This work is licensed under Creative Commons Attribution-ShareAlike 4.0 International. To view a copy of this license, visit https://creativecommons.org/licenses/by-sa/4.0/

Parametric Water Bottle Holder for Bike (Gatorade Zero)

water-bottle-holder.stl

lid.stl

Cute Spider - no details.stl

Cute Spider - mouth.stl

Cute Spider - eyes 95 percent.stl

Cute Spider - buttcheeks.stl

bone-3-4.stl

bone-3-3.stl

bone-3-1.stl

bone-3-0.stl

bone-2-4.stl

bone-2-3.stl

bone-2-1.stl

bone-2-0.stl

bone-1-4.stl

bone-0-3.stl

bone-1-3.stl

bone-1-1.stl

bone-1-2.stl

bone-1-0.stl

bone-0-0.stl

bone-0-1.stl

bone-0-2.stl

bone-0-4.stl

Spring-Return-Hinge-Body.stl

Spooky Tree Lantern - Lid.stl

Oregon-based, learning to "make it" as a maker!

If my work helps you in any way, please support me through the link above :3

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

John D. Sutton

Achievements

Seedling

Explorer

Pinned models

Otter Jack-O'-Lantern

Cute Halloween Spider

Giant Flexy Skeleton Hand

Spooky Tree Jack o' Lantern

Gridfinity Network Cable Fidget Toy

Crystal Teardrop / Raindrop / Monster Drool

Spooky Tree Jack o' Lantern

Cedar Log Scent Diffuser

Giant Flexy Skeleton Hand

Timemore C2 to Wide Mouth Jar

Magnetic Curtain Hanger

Cute Halloween Spider

Bike Bell Gear

Ebook Display Book!

Otter Jack-O'-Lantern

LED Rope Endcap

Raspberry Pi Touchscreen Display 7"

Outlet Box Double Switch Cover

Kobra 2 / 40mm Endcap

Teeny Tiny Benchtop Power Supply

4-Way Electrical Junction Box (Parametric)

Desk Button Mount (Parametric)

Parametric Water Bottle Holder for Bike (Gatorade Zero)