tracking pixel
Drew M

Miller Lite Nerf Gun

by

ImmenseFIend

Follow
Follow
Remix Model
Like
ImmenseFIend
ImmenseFIend
Image 1 of 6
Miller Lite Nerf Gun 3d model
2D
3D
Makes
Miller Lite Nerf Gun 3d model
Miller Lite Nerf Gun 3d model
Miller Lite Nerf Gun 3d model
Miller Lite Nerf Gun 3d model
Miller Lite Nerf Gun 3d model
Miller Lite Nerf Gun 3d model
5 Likes5 DownloadsApril 19, 2022


I like challenging myself, this is one of my personal challenges I made for myself.

I wanted to design a Nerf gun in one day (1) using only what I have on hand (2)without ordering any “specialty items” (I.e. O-rings), and (3) I could spend $10 at Walmart. This is what I came up with, a nerf gun based around an aluminum miller lite bottle. The piston on the inside uses PETG piston rings to seal against the walls of the bottle, and a one way valve so you can load a dart and the air will be drawn through the one way valve instead of pulling a vacuum behind the dart. Print red parts in PETG and Grey and Blue Parts in PLA

Never designed a nerf gun before, but I’d say that this was a good test on the compression a 3D printed piston apparatus would be able to generate.

BOM: 1/2in dowel 15x M3x20mm button head bolts 15x M3 square nuts 3x M3x40mm button head bolts +3 M3x20mm bolts and +3 M3 square nuts for each barrel extension

Optional: Petroleum Jelly for Piston Lube


5 Likes5 DownloadsApril 19, 2022




5 Likes5 DownloadsApril 19, 2022