.gif&w=3840&q=75)
.gif&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
This is a versatile vintage lantern that can be used in three ways:
-Handheld: A top ring allows you to carry or hang it effortlessly, making it ideal as a traditional lantern. It works great as an ornament too!
-Street Light: When attached to its base, it transforms into a charming street lamp.
-Wall Mounted: A bracket option allows it to be easily fixed to a wall. With just one or two screws, you can install it in seconds, making it an adaptable wall fixture.
Designed with a compartment that perfectly fits an LED candle up to 40mm in diameter, it casts a warm, realistic glow.
This lantern is optimized for 3D printing without supports, ensuring smooth, straightforward printing and a detailed finish that captures its vintage look.
I have also included a pre configured Factory File compatible with Bambu Studio and Orca Slicer.
"All of my models are for personal use only, unless you are an active subscriber with a commercial license."
3D PRINTING SETTINGS:
-No supports needed!
-2 Walls, 5-7% rectilinear infill, 0.16mm layer height or variable layer height
-Print the diffuser in vase mode and slow down. Use a brim if needed
-You can attach the wall bracket with 1 screw or 2 if you prefer, the screw holes are hidden at the back