.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
Steampunk Gears Wine Rack / Easy Print
Elevate your home decor with this unique steampunk wine rack, designed to hold up to four bottles of your favorite wine!
Perfect for any home setting, it accommodates up to four wine bottles, reflecting the industrial elegance of steampunk aesthetics with its interlocking gear design.
Features:
-Easy to print, only the small gears need a few supports as per picture.
-It fits up to 4x 84.5mm diameter bottles.
-You will have to print, 2 big gears, 2 rods, 4 nuts and 4 small gears (2x Left and 2x right)
-This model looks specially beautiful with silk and metallic colors.
-It's easy to put together, no glue needed. Just print all the parts, the big gears insert inside the small ones, and then you use the rods and nuts to lock everything in place.
-It only takes about 13 hours to 3d print on a Bambu Lab printer and takes about 400–500 grams of filament.
-The gear file measure 250x250mm, so you will need a medium-sized printer for this project. It can be scaled down, but then it won't fit wine bottles.
"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."
3D PRINTING SETTINGS:
-Minimal supports required
-10-15% Rectilinear infill, 0.2-0.25mm layer height, 2-3 walls
-For the large gears, slow down the first layer and if possible use an enclosure or print in a room that isn't cold or they might warp