Knitted Deer Head Christmas Ornament / 3MF Included / Prints By Parts / No Supports
byIK3D.png&w=3840&q=75)
.gif&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
Adorable deer head ornament with a very detailed knitted texture all around.
This model can be printed in a single piece in colors but also by parts that attach together, so anybody can enjoy this model in colors.
It´s also very easy to use as it doesn´t need any supports at all.
I have included pre configured and pre painted files compatible with Bambu and Orca slicers, to be used with and without AMS.
"All of my models are for personal use only, unless you are an active subscriber with a commercial license."
3D PRINTING SETTINGS:
-No supports needed!
-2 Walls, 5-7% rectilinear infill, 0.16mm layer height or lower, use a brim for eyes and nose
-Use glue to stick the parts together, I like to use Loctite Superglue
-The slicer might say that the multicolor file has some errors, do not fix them or you won´t be able to print in colors, it prints perfectly fine