.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.jpg&w=3840&q=75)
.jpg&w=3840&q=75)
This stunning crystal lamp is a perfect blend of elegance and practicality, making it an ideal addition to any space.
As a decorative item, it adds a touch of elegance and sophistication to any room. But there's more—simply switch it on, and it transforms into a radiant lamp, casting a warm, inviting glow that enhances the ambiance of your space.
Crafted with ease of use in mind, the crystals lamp is incredibly simple to 3D print and assemble, requiring no supports. You can create this lamp effortlessly, even if you're new to 3D printing.
The design allows for endless customization, so you can combine a variety of colors to match your unique style and decor, and also swap the crystals and base around as many times as you like.
It includes 2 types of crystals, type A and type B. I recommend the use of type A is it allows more light through, but you are welcome to test both variations. No glue is needed on this project as the crystals and the base fits nicely, but you could glue the crystals to the raiser if you like.
Pictures and reel by the talented Coco3D, follow her here: https://www.instagram.com/_coco3d_/
"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."
3D PRINTING SETTINGS:
-No supports needed.
- Settings for "Type A crystals":
This is the recommended type as is completely hollow and allows more light through. You have to set "bottom shell layers" to "0", walls to "2" and top layer to "2". Use 0.2mm layer height or lower.
For the "raiser", use 2 walls and no infill, 4 top and bottom layers.
-Settings for "Type B crystals": Use a brim, set walls to "2", top and bottom layers to "2". Use 0.2 layer height or lower.
-Settings for the base and locking thread: 2 Walls, 0.16mm layer height (I recommend using variable layer height) and 8% rectilinear infill at least.
-For the LED, I have used Bambu Labs LED light, but the model can be adjusted to fit other lamps too: https://store.bambulab.com/products/led-lamp-kit-001