Cloud Stand Playstation 5 Disc Edition - Print-in-Place
byHoloprops
Print-in-place No Support Needed It's only for the PlayStation 5 Disc Edition. Not the PlayStation 5 Digital Edition. Check my designs for other consoles
I'm thrilled to announce the release of a brand new Cloud dock that's specifically designed for the PS5.
To make sure you have a smooth printing experience, we recommend turning off any support as it's not necessary.
Plus, using some infill can help you avoid any potential issues. In the pictures we've provided, you can see that the peach print has a Giroid pattern of 15% and was printed with Polyterra filament. The Crystal Blue from Filamentum version, which was printed with a Lightning infill at 35%, also turned out great. Both were printed on a Bambu Lab X1-C.
The dock fits the PS5 Disc Edition perfectly,
Thank you all and have a great day!
3D PRINTING SETTINGS To get the best out of the STL file, please follow these guidelines: • No support is needed to print this dock. Everything is Print-in-Place. • Layer Height 0.2mm • Nozzle 0.4mm • Recommended infill 15%. • Recommended Infill Pattern: Gyroid or Cubic
• Prepare and clean your bed for excellent adhesion. • Make sure your bed is correctly leveled. Then check again :D • Try to hide the seam and place it where nobody will pay attention. • Make sure your printing and bed temperatures are adequate for the filament you are about to use.