A counting device for health and XP in Gloomhaven or Health and Stamina in Imperial Assault or Descent.

All the 'Foot' files are for the left side, if you want a right hand side, you just mirror one in your slicer.

I liked the look and feel of Scottimus' Life (or anything) Counter, but I disliked the clip for holding it together and the cylindrical part is annoying to print and completely unnecessary, so i redesiged the entire thing.

The peg that holds it all together can be printed in different lengths to make room for 2, 3, 5 or 2 and 2 with a middle section to separate the numbers. I also made some 1 mm spacers to get some space between the sides and the number rings.

Once assembled it can be taken apart again and reassembled in a different configuration with a central peg with a different length.

The Middle section has the same width as the number rings, so you can swap it for a number ring if you dont want it.

I made my design on Onshape:
https://cad.onshape.com/documents/b2006b51bb805ecd3b621795/w/e2bdb640d57a3792caf8e1d6/e/7bbd7c8935b1bea6f009a6eb?configuration=SpringDiameter%3D0.021%2Bmeter

You can sign up for free and fork it if you want to change something.

Remixed from 
Life (or anything) counter for table-top games
https://www.thingiverse.com/thing:3351902

Life + XP Counter (Gloomhaven)

Counter.Foot.Left.Arrow.Icon.v1.2.stl

Counter.Foot.Left.Health.Icon.Rebel.Logo.v1.2.stl

Counter.Foot.Left.Health.Icon.v1.2.stl

Counter.Foot.Left.Strain.Icon.Galactic.Empire.Logo.v1.2.stl

Counter.Foot.Left.XP.Icon.v1.2.stl

Counter.Middle.Section.v1.2.stl

Counter.Number.Ring.v1.2.stl

Counter.Peg.2.Rings.v1.2.stl

Counter.Peg.3.Rings.v1.2.stl

Counter.Peg.5.Rings.4.Spacers.v1.2.stl

Counter.Peg.5.Rings.v1.2.stl

Counter.Spacer.v1.2.stl

Counter.Spring.v1.2.stl

A handle to hold the minis when you spray prime them.

Shaped for 25mm (1 inch) bases so you can spray prime them from beneath.
Attach minis with BlueTack or double sided tape.

The handle can be unscrewed from the rail, so you can switch to another set of minis and set the first batch to dry.

If you dont want to unscrew the handle, you can put it in a heavy mug, so it wont fall over while the minis are drying.

I might do a longer rail for 9 or 11 minis and maybe a magnet system for connecting the handle. Maybe even one with magnets on the rail, if you have magnets on the bases of your minis.

I printed the rail and the connector with 0.12mm layerheight and the handle in 0.2mm.

If the theads are too tight/loose, you can scale the connector down/up a bit to get a good fit.

v2: I rotated the handle threads a bit, so the handle and rail will be better balanced when leaning against the side of a cup when you place the handle in a cup while the minis dry.

v3 Added a rail for 9 minis.
v4 Added rails for 3 anf 5 minis.
     Added versions of rails without slots for better bed adhesion. Blu Tack makes the models stick just fine without the slots.

Priming Handle for Minis

Priming.Handle.v1.stl

Priming.Handle.v1.step

Priming.Handle.Connector.v1.step

Priming.Handle.Connector.v1.stl

Priming.Handle.Slotted.Rail.v1.stl

Priming.Handle.Slotted.Rail.v1.step

Priming.Handle.Slotted.Rail.9.Minis.v1.step

Priming.Handle.Slotted.Rail.9.Minis.v1.stl

Priming.Handle.Rail.3.Minis.v1.stl

Priming.Handle.Rail.3.Minis.v1.step

Priming.Handle.Slotted.Rail.3.Minis.v1.step

Priming.Handle.Slotted.Rail.3.Minis.v1.stl

Priming.Handle.Rail.7.Minis.v1.stl

Priming.Handle.Rail.7.Minis.v1.step

Priming.Handle.Rail.9.Minis.v1.step

Priming.Handle.Rail.9.Minis.v1.stl

Priming.Handle.Rail.5.Minis.v1.stl

Priming.Handle.Rail.5.Minis.v1.step

Priming.Handle.Slotted.Rail.5.Minis.v1.step

Priming.Handle.Slotted.Rail.5.Minis.v1.stl

Small and Medium sized handle for mini painting with swappable magnet bases.
Made for 5x2mm magnets. The Medium sized one is inspired by the Citadel Painting Handle Mk2.

Blu Tack the minis on to the bases and swap them out easily when painting many at the same time.

There are two versions of the mini base, the thick version is easier to grip when swapping out the mini, the thin one uses less pla. The slots in the top of the base make the Blu Tack stick better, but there are versions without the slots too.

There are two versions of the handle, one has same diameter top as the mini bases, the other has narrower top for easier base swap. 

Small and Medium Mini Painting Handle with Swappable Magnet Bases

28mm.Figure.Base.5x2mm.Magnet.stl

28mm.Figure.Base.5x2mm.Magnet.step

Mini.Painting.Handle.5x2mm.Magnet.step

Mini.Painting.Handle.5x2mm.Magnet.stl

Mini.Painting.Handle.5x2mm.Magnet.Smaller.Top.stl

Mini.Painting.Handle.5x2mm.Magnet.Smaller.Top.step

28mm.Figure.Base.5x2mm.Magnet.Thin.step

28mm.Figure.Base.5x2mm.Magnet.Thin.stl

28mm.Figure.Base.5x2mm.Magnet.No.Slots.step

28mm.Figure.Base.5x2mm.Magnet.No.Slots.stl

28mm.Figure.Base.5x2mm.Magnet.Thin.No.Slots.stl

28mm.Figure.Base.5x2mm.Magnet.Thin.No.Slots.step

Mini.Painting.Handle.Medium.5x2mm.Magnet.step

Mini.Painting.Handle.Medium.5x2mm.Magnet.stl

I wanted a thinner health dial and one where the First digit plate fit inside the second digit, on the same "level". I also wanted all the unused numbers to be covered, so there is no confusion.

The first digit plate has a version with a 0 and one without.

Optimized for 0.2mm layerheight and 0.4mm nozzle but the digits will be sharper with a 0.2mm nozzle. 
Switch filament for the last 3 layers of the digit plates to make the numbers stand out.
No support required.

V3: Middle plate (Middle.Plate.v2) has been adjusted to put less pressure on the top cover and make the second digit plate fit better and wobble less.

Helo

Achievements

Seedling

Explorer

Fan Favorite