A simple rolling deck with a click in pokie stick. Remix for custom name. 
Print in place design.

Works on Creality Ender 3 original, SE and K1 (probably more I just haven't tested on other printers yet).

Make sure infill is 10% or above. 

3 wall line count (2 can show infill when held in the light). 4 works well also.

Poke stick likes a level bed to start off with.

Enjoy!

Rolling deck with poke stick © 2023 by Luke Fisher is licensed under Attribution-NonCommercial 4.0 International. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc/4.0/

Rolling deck with click in poke stick 

A simple rolling deck with a click in pokie stick.

rolling deck with pokie.3mf

Build in one go and print in place design, 608 bearing weighted door closer. Add weight to your specific door yourself (i used screws for weights in my photo. Doesn't fully shut your door (pets can still access by pushing) but keeps it held near enough closed each time you use it.

UPDATE:
I've recently added a dog handle so your pets can learn to let themselves out without you having to keep getting up to do it. WARNING if windows are open there's still potential for your door to slam, so please be aware of high winds and slamming doors. As it's easy to open your pets can pull on the pet handle and let themselves out as door stays slightly ajar.

V2. Door frame bracket is slightly larger to fit the 608 bearings tighter/better.
V3. Better main bracket design for print in place and added hole to dog handle for attaching rope for dogs to pull open.

Settings that work well.

Wall line count: 3-4
Top/bottom layers: 3-4
Infill: 25%
Concentric infill: on
Supports: off

https://creativecommons.org/licenses/by-nc-nd/4.0/


Door closer (print in place design)

Door part FINAL.stl

Door weight.stl

Bearing wheel.stl

Door frame bracket.stl

Dog door closer handle.stl

Door closer bundled (without dog part).stl

Dog door paw thangs bundled.stl

Print in place sofa/Bed mini table for drinks, remote and glasses. Hold up to 3 pairs of glasses max (build glasses holder extra). 
Great for not losing remotes down side of sofa or spilling drinks.

Setting my Creality K1 used. (works on most 3D printers)
wall line count 4- 5 for water resistance 
infill 15% with concentric infill on.
Top/Bottom 4 - 5 

Sofa/Bed buddy (print in place)

sofa buddy glasses add on.stl

Sofa buddy.stl

Print in place dual phone stand. One side for thinner phones/cases. Other side for thicker phone cases e.g. wallet phone cases. 
Has holes for charging leads.

V2. Better design for print in place. Increased height slightly for better cable fitting.

Roughly 100g filament.

Creality K1 settings,

wall line count: 3-4
Top/bottom: 3-4
Infill: 15%


Dual phone stand (print in place)

phone holder v3.6.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

GreenPrintUK