Extendable laptop phone holder and shelf. Angled phone holder to face you while on laptop. None of the models need supports.

Print without supports in 1 go.

Latest upgrade: 03/08/2024 Mirrored the extension parts!!! Added each part to print individually.

Printer settings on my K1;

Supports: off
Brim: on around 10 line width (find in slicer adhesion settings)
wall line count: 3
Top/Bottom: 3 - 5
Infill: 10% - 20%

Laptop phone holder/shelf (no supports).stl

Laptop phone holder single pin part.stl

Laptop phone holder pins bundled.stl

Laptop phone holder side part.stl

Laptop phone holder extention part.stl

Laptop desk done.stl_1.stl

Laptop phone holder shelf v10.stl.stl

Laptop phone holder part v10.stl.stl

Umbrella holder that stands umbrella's well vertically. and helps drain any water with the angled inside design and holes in each corner to drain extra excess water onto drip stand/drip tray.
V2: Increased size by 10%

Print setting (Creality K1)

Wall line count: 3 - 4
Infill: 15% - 20%
Top/bottom: 3 - 5


Umbrella holder/dryer (print in place)

umbrella holder long v25.stl

umbrella holder v26.stl

Strong extendable car cup holder. 

Print in one go.
Universal design.
Spring to absorb shock.
Extendable vent clip.

Print settings

wall line count: 4
Infill: 15-20%
Top/Bottom: 4-5
Adhesion: Brim all or just the selected objects in my sliced pic.

V2 Update 15/06/24: Stronger right angle clip.

Car cup holder (no supports)

Cup holder FINAL bundled.stl

Cup holder cup part v13.stl

Print in place sofa/Bed mini table for drinks, remote and glasses. Hold up to 3 pairs of glasses max (build glasses holder extra). 
Great for not losing remotes down side of sofa or spilling drinks.
Recently added optional mini shelf with drip tray hole.

Setting my Creality K1 used. (works on most 3D printers)
wall line count 4- 5 for water resistance 
infill 15% with concentric infill on.
Top/Bottom 4 - 5 

Sofa/Bed buddy (print in place)

Sofa buddy.stl

sofa buddy add on shelf v14 merged.stl

A simple rolling deck with a click in pokie stick. Remix for custom name. 
Print in place design.

Works on Creality Ender 3 original, SE and K1 (probably more I just haven't tested on other printers yet).

Make sure infill is 10% or above. 

3 wall line count (2 can show infill when held in the light). 4 works well also.

Poke stick likes a level bed to start off with.

Enjoy!

Rolling deck with poke stick © 2023 by Luke Fisher is licensed under Attribution-NonCommercial 4.0 International. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc/4.0/

Rolling deck with click in poke stick 

A simple rolling deck with a click in pokie stick.

rolling deck with pokie.3mf

Print in place dual phone stand. One side for thinner phones/cases. Other side for thicker phone cases e.g. wallet phone cases. 
Has holes for charging leads.

V2. Better design for print in place. Increased height slightly for better cable fitting.

Roughly 100g filament.

Creality K1 settings,

wall line count: 3-4
Top/bottom: 3-4
Infill: 15%


Dual phone stand (print in place)

phone holder v3.6.stl

Build in one go and print in place design, 608 bearing weighted door closer. Add weight to your specific door yourself (i used screws for weights in my photo. Doesn't fully shut your door (pets can still access by pushing) but keeps it held near enough closed each time you use it.

UPDATE:
I've recently added a dog handle so your pets can learn to let themselves out without you having to keep getting up to do it. WARNING if windows are open there's still potential for your door to slam, so please be aware of high winds and slamming doors. As it's easy to open your pets can pull on the pet handle and let themselves out as door stays slightly ajar.

V2. Door frame bracket is slightly larger to fit the 608 bearings tighter/better.
V3. Better main bracket design for print in place and added hole to dog handle for attaching rope for dogs to pull open.

Settings that work well.

Wall line count: 3-4
Top/bottom layers: 3-4
Infill: 25%
Concentric infill: on
Supports: off

https://creativecommons.org/licenses/by-nc-nd/4.0/


GreenPrintUK

Achievements

Seedling

Voyager

Debutant

Pinned models

Rolling deck with click in poke stick

Sofa/Bed buddy (print in place)

Umbrella holder/dryer (print in place)

Laptop phone holder/shelf (no supports).stl

Laptop phone holder/shelf (no supports).stl

Umbrella holder/dryer (print in place)

Car cup holder (no supports)

Sofa/Bed buddy (print in place)

Rolling deck with click in poke stick

Dual phone stand (print in place)

Automatic door closer (no supports)