tracking pixel
Marcel R

Cube wave - a side table

by
Geoshape
Follow
Follow
Remix Model
Geoshape
Geoshape
|
Image 1 of 6
Cube wave - a side table 3d model
Geoshape
Geoshape
|
Image 1 of 6
Cube wave - a side table 3d model
2D
3D
Makes
Cube wave - a side table 3d model
Cube wave - a side table 3d model
Cube wave - a side table 3d model
Cube wave - a side table 3d model
Cube wave - a side table 3d model
Cube wave - a side table - It took 20h per cube using my Prusa mk4 with inputShaper.  I added cylindrical legs (40mm width x 30mm height) - 3d model
This model is restricted by licensing terms. 
201 Likes448 DownloadsSeptember 7, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.56mm

Layer height0.56 mm
Infill density10 %
SupportsNone
Nozzle size0.8 mm
Infill styleGyroid

Build yourself a sleek and minimalistic side table consisting of two identical pieces stacked on each other. The waveform pattern enables a perfect positioning without the need for additional mounting hardware.

**Size: **240 x 215 x 240 mm

As the pieces are really big I recommend using a 0.8mm nozzle and go high in terms of the layer height. Consumes about 800g per piece. You can print the bottom one with logo. Position the seam in the waveform region.

Recommended settings: 0.8mm nozzle 0.56mm layer height 1 wall 10% gyroid


201 Likes448 DownloadsSeptember 7, 2024




This model is restricted by licensing terms. 
201 Likes448 DownloadsSeptember 7, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.56mm

Layer height0.56 mm
Infill density10 %
SupportsNone
Nozzle size0.8 mm
Infill styleGyroid