This model is restricted by licensing terms.
View license.
14 Likes35 DownloadsSeptember 7, 2024
This model is restricted by licensing terms.
View license.
Instructions
Filament • 0.56mm
Layer height0.56 mm
Infill density10 %
SupportsNone
Nozzle size0.8 mm
Infill styleGyroid
Build yourself a sleek and minimalistic side table consisting of two identical pieces stacked on each other. The waveform pattern enables a perfect positioning without the need for additional mounting hardware.
**Size: **240 x 215 x 240 mm
As the pieces are really big I recommend using a 0.8mm nozzle and go high in terms of the layer height. Consumes about 800g per piece. You can print the bottom one with logo. Position the seam in the waveform region.
Recommended settings: 0.8mm nozzle 0.56mm layer height 1 wall 10% gyroid
Categories:
14 Likes35 DownloadsSeptember 7, 2024
This model is restricted by licensing terms.
View license.
14 Likes35 DownloadsSeptember 7, 2024
This model is restricted by licensing terms.
View license.
Instructions
Filament • 0.56mm
Layer height0.56 mm
Infill density10 %
SupportsNone
Nozzle size0.8 mm
Infill styleGyroid