Latest version of my Phone Stand
Cleaner and a little more compact than the last version
**Feedback for improving is welcome**
- **Make sure you don't experience stringing and can print decent Overhangs**
- **Print slowly for the best result**
- **Print-In-Place**

**Model should already be orientated correctly for the best result, if not, see the pictures I posted**
**The support for the overhang is included in the model file** (no other supports needed)

Has 7 positions with endstops both ways (6 x 20°, 1 for easy storage when folded)
Around 0.25-0.35mm tolerance (except the 90° Overhang which should be 0.2-0.28mm depending on your Layerheight)

Phone Stand Print-In-Place (v3)

!!! Make sure you don't experience stringing and can print decent Overhangs !!!
!!! Print slowly for the best Results !!!
!!! Print-In-Place !!!
Model should already be orientated correctly for the best results, if not, see the pictures I posted

Has 6 positions with endstops both ways (5 x 20°, 1 for easy storage when folded)
Around 0.25-0.35mm tolerance (except the 90° Overhang which should be 0.2-0.28mm depending on your Layerheight)

Phone Stand Print-In-Place

!!! Make sure you don't experience stringing and can print decent Overhangs !!!
!!! Print slowly for the best Results !!!
!!! Print-In-Place !!!
_**Model should already be orientated the best looking way if not, see the pictures I posted**_
- Has 6 positions with endstops both ways (5 x 20°, 1 for easy storage when folded)
- Around 0.25-0.35mm tolerance (except the 90° Overhang which is 0.2-0.28mm depending on your Layerheight)

Phone Stand Print-In-Place (v2)

New-Stand-Print-In-Place-024mm v3 v26-2parts-export.stl

Simple Hole Cover for (60mm) holes, but scaleable in X/Y.
**ONLY FOR TABLES UP TO 25MM THICK**

No specific settings

Hole Cover (Scaleable)

Complete Modell.3mf

_**If someone needs a special size (inches for example) leave a comment**._

Desk Hooks for 40mm, 30mm, 20mm thick Desks, Tables (The hooks can adjust around 2-4mm | so for example 40mm -> adjusts to around 36mm and so on)

- Holds around 5kg (with 4 Walls, 10% Cubic Infill and 4 Bottom-/ Toplayers)
- The higher the printing temperature, the more weight the hook can take (layers stick together better | around 220°C for PLA)

Desk Hook

Desk Hook 40mm-export.stl

_**If someone needs a special size write a comment.**_

Simple and Stylish Wall Hook for Coats, Hats and whatever you might need to hang up.

- Hole-To-Hole distance is 40mm
- Made for M3/M4 Flathead Screws
- Double Sided Tape holds it also strong (depending on your Tape)
- Holds around 2-3.5kg (3 Walls, 10% Cubic infill) per Pole

Wall Hook

Wall Hook-export.stl

Phone Stand without Print-In-Place
!!! Make sure you don't experience stringing !!!
Print-In-Place Version:
https://thangs.com/VeYlon/Phone%20Stand%20Print-In-Place-51206?manualModelView=true

(Around 0.3-0.4mm tolerance)

Settings:
0.24mm Layerheight 
0.4 or 0.6mm Line Width  (My Printer is calibrated to do 0.45mm with a 0.4mm Nozzle but printed it with 0.65mm Line Width on a 0.4mm Nozzle) 
Atleast 2 Walls (with 0.6mm Nozzle, 3 with 0.4mm Nozzle)
1mm Minimal Travel of Rectraction

Phone Stand (v1)

DO-NOT-PRINT-REFERENCE.stl

!!! Make sure you don't experience stringing !!!
!!! Print-In-Place !!!
Normal Version:
https://thangs.com/VeYlon/Phone%20Stand-51472?manualModelView=true


UPDATE 2 
- Added the Normal Version with a screw-on cap (linked above)

UPDATE 1

- The Overhang where the two parts join might be difficult to remove - I used a Hammer to separate the parts and get them moving 
- a Knife/Scapel could also work alltough it might need some force depending on the bridging capabilities of your printer (Thanks to jimmypuurple)
-----
(Around 0.3-0.4mm tolerance except the Overhang mentioned above which is 0.2-0.28 depending on your Layerheight)




Phone Stand Print-In-Place (v1.5)

!!! Make sure you don't experience stringing !!!

Settings:
0.24mm Layerheight
0.6mm Nozzle (0.4mm Nozzle with 0.6mm Line Width)
2 Walls 
1mm Minimal Travel of Rectraction
 




Print-In-Place Phone Stand

https://www.printables.com/@Disappointed_341392 (also me)

**About me:**
I'm an Apprentice in a Metal Workshop and I've been 3D printing and designing for 5 years now.

My Goal is to design and provide High Quality Models.
Any Request (even for new Models) or Idea is welcome, just leave a comment.

**Software and Printers:**
Designing and Rendering using Fusion 360 
(Slicer: Ideamaker, Cura, PrusaSlicer)
- RatRig VCore 3.1 (500)
- Heavily modified Ender 7

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Disappointed

Achievements

Seedling

Debutant