A verry simple tray to put your glasses in. Includes a cutting help you can use to cut out a piece of felt (~1.8mm thick) to insert in to the tray. The outside of the cutting help can be used to cut a rubber non stick layer to attach to the base.

∆ 003 - Tray For Glasses

Tray.stl

This is designed to hold 3 test tubes with a diameter of 20mm. You can insert 6x2mm magnets in the base and stand to snap them together or use glue. You can also use the stand without a base. In that case the magnets can be use to secure it to a metal surface.

Print the stand on its side so there are no supports needed.

∆ 002 - Test Tube Propagation Station with Base

Test Tube Holder 3 stand.stl

A verry simpel stand for the A6 Stainless Steel memobottle. 

It has a little cutout in the middle to add a very small piece of felt or rubber to hold the bottle in place and give it a nice landing. Includes a small cutting help

∆ 001 - A6 Stainless Steel memobottle stand

Holder Big.stl

Cutting Help.stl

Based on Aspu's MX Blocker: https://thangs.com/designer/Apsu/3d-model/MX%20Blocker%20v5.stl-16517

MX compatible switch blocker to fill a gap in a mechanical keyboard plate. I printed this in transparent TPU on its head (top of the model to the baseplate) to be able to print it without infill.

Features:

- Standard 14x14mm (slightly oversized by 0.1mm to stay put)
- Printed in TPU for snug fit
- Allows Led shine trough 

# Printing tips

Tips by me, for me in the future:

- Print with nozzle @228 and first layer bed @40
- I used the Generic TPU @95 profile
- I used "ERYONE TPU filament 1,75 mm, 3D-drukfilament TPU, 0,5 kg, 1 spoel, -0,05 mm, 95 A, transparant" fillament
- Invill pattern lines with a 10% infill

MX Blocker v5 - ZSA Moonlander shine trough edition

Based on Aspu's MX Blocker: https://thangs.com/designer/Apsu/3d-model/MX%20Blocker%20v5.stl-16517

MX compatible switch blocker to fill a gap in a mechanical keyboard plate. I printed this in transparent TPU on its head (top of the model to the baseplate) to be able to print it without infill.

Dimensions:

- Standard 14x14mm (slightly oversized by 0.1mm to stay put)
- Printed in TPU for snug fit
- Allows Led shine trough 

MX Blocker v5 - Moonander shine trough edition

Left right and center adapter to connect a Skadi pegboard from Ikea to the Boaxel rails. Can be used to mount multible Skadi boards next to each other 

Remix of https://www.thingiverse.com/thing:5265674 and https://www.thingiverse.com/thing:5942329

IKEA Boaxel Skadi Holder

IKEA_BOAXEL_SKADI_HOLDER_Dual.stl

To fit this you will need to shorten an existing EC11 encoder. See: https://blog.benstein.nl

Rotary Encoder Low Profile

Rotary Encoder Low Profile - Complete.stl

Simple Rotary Knob with knurling pattern. Read more about it on https://blog.benstein.nl

Rotary Knob with knurling pattern

Rotary Knop with Pattern v4.stl

Test Tube Holder 3 Base.stl

∆ Fusing tech, plastic and everything I can get my hands on in designs

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Delta Design

Achievements

Novice Maker

Seedling

Trailblazer

Pinned models

∆ 001 - A6 Stainless Steel memobottle stand

∆ 002 - Test Tube Propagation Station with Base

∆ 003 - Tray For Glasses

∆ 003 - Tray For Glasses

∆ 002 - Test Tube Propagation Station with Base

∆ 001 - A6 Stainless Steel memobottle stand

MX Blocker v5 - ZSA Moonlander shine trough edition

IKEA Boaxel Skadi Holder

Rotary Encoder Low Profile

Rotary Knob with knurling pattern