Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5760905.
#OutdoorThangs
Remix of this https://www.printables.com/model/342049-gnome-supportless

Recommend outdoor material if planning on using outside. I sized this to be what I found online as a standard gnome size and can be printed on a normal sized printer.

PLA would work for shaded outdoor areas but why take the chance print in ASA, PETG, or ABS I suppose.

I printed the 2 in the pictures in rainbow PETG, I like how they came out.

Printed these with a .4mm nozzle at .2mm layers with a .3 initial layer, 3 walls and 6 top and bottom. These are strong and will last a long time outdoors.

I recommend filling with sand, or BB's like I did. Its heavy AF with the BB's. Less chance of the dog running off with it or it getting blown around the yard.

Also the top is kind of pointy, I torched it a bit to be blunt.

Scaling - you could scale this, make sure to scale them both, I don't recommend that.

Fillable Gnome

BODY3D_Gnome_remix_screw_plug.stl

I designed this from many many hearts overlaid on each other, then formed into a chalice shape. Vase mode print, make sure to use that mode in your slicer. 
Prints without supports and I recommend at least 1mm walls. I print with a .6 nozzle and use 1.2 line width. This give the vase 2 walls while in vase mode.
I hope you enjoy this model
DWTC



Chalice Vase

Remix of Mother's Day with Daughter by W3DMaker
I really liked what W3Dmaker did and had to turn it into a pendant. Can also be a magnet. I use the 20mm square magnets.
Wear it out then come home and put it on the fridge, ready for the next outing.
Can be scaled but be mindful of the Z height, for color changes, and the hole size. The hole is 6mm and most chains should fit.
Print with .2mm layers and swap colors accordingly.
base color till 7mm
mom and daughter 7.2mm - 8.6
heart outline 8.8 till end

I hope you enjoy this model
DWTC

Mother with Daughter pendant or magnet mirror

mom daughter pendant v2.stl

A renaissance light switch cover plate.
David got excited about this project when it turned on.
Print with supports on the under side of the plate.
This is the switch plate to one of my print rooms.
Printed with .2mm layers using PolyTerra charcoal black and cotton white.
This is actually a color swap model, swap the color at 6.2mm

Renaissance Light Switch Cover Plate

renaissance light switch cover.stl

AMS renaissance light switch cover.3mf

I am working my way toward weekly releases. 

I am a numbers person. Not data analysis numbers but real numbers like 42 or 3. I was born at the same time of day as the day and month. Let's see where I go with this, I am fairly new. 
A follow is greatly appreciated.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>I am working my way toward weekly releases.</p>
<p>I am a numbers person. Not data analysis numbers but real numbers like 42 or 3. I was born at the same time of day as the day and month. Let&#x27;s see where I go with this, I am fairly new.
A follow is greatly appreciated.</p></div>

DaddyWazzy_TheCreator