Remixed K2_Kevin's Maker chip Copied most of the instructions from K2 as well. More MakerChips! 7 Additional Styles for your customizing pleasure! And 8 Accents to go along with the fun!
Edges templates: There are 7 types for most of these. A full 3mm, and then a 1.5mm top or bottom (bot). This allows you full control for different colored sides. They are all 8 pieces (except Gun and Pistolero) for a reason, so they work with the accent pieces, they go in-between or on top. Rectangle edge, Nozzle edge (2 versions), Bird edge, Gun Edge, Pistolero Edge, Half Circle, and Hex was just added Accent pieces: These do not go to the edge but add a nice touch depending on what you want to achieve. Dots, Stars, All suites (2 versions), and individual suits (hearts, spades, diamonds, clubs) Center or cores: I included a 27mm core that is solid 3mmZ, as well and splitting it into 1.5mmZ top and bot. You can resize this to a larger or smaller diameter but keep Z at 100%. I also included a 27mm core 1mmZ that has a 1mm gap in the center, this is for an NFC tag. Just add a pause at the appropriate layer 1.8-2.0mm
DIY Instructions: Open Bambu Studio Drag/Drop the Base Circle into slicer - Base.stl for this remix. Add the version of Chip Decoration These named Edge for this remix Add your accents here, rotate and center to where you want them aligned. Add the Center of your choice here. Center the Chip decoration Switch to Objects view (In the Process dialog box in the slicer - Photo Included) Select objects, right click and Assemble. Slice to check your MakerChip Top and Bottom!
Adding your own logo: Create your logo as STL, Logo z-height only needs to be 0.6mm to 0.8mm. Size your logo to fit your Maker Chip. You can scale, but be sure to maintain your .8mm height. In the Objects view, select your logo and select the assembly, right click and merge/combine. Slice to verify you completed this correctly, and Print!
Adding your own QR Code: I've had great success using: https://genqrcode.com/generator/stl to create QRCodes.
Create your QR code as STL Size is 26mm for most chips (you can always scale in the slicer) QR-Code z-height only need to be 0.6mm to 0.8mm. Size your logo to fit your Maker Chip. You can scale, but be sure to maintain your .8mm height. In the Objects view, select your QR-Code and select the assembly, right click and merge/combine. Now use the MOVE option in slicer to move the QR code up until its just peaks through the top layer. You can also flip your chip, and place the QR code on the bottom (so it's “easy even” with the layer), don't forget to flip it back over once merged. Check the centering for the objects one last time under the assembly in the objects tab. Slice to verify you completed this correctly, and Print!