Daboo
Daboo

Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo

by
Daboo
Daboo
Follow
Daboo
Daboo
|
Image 1 of 8
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model
Daboo
Daboo
|
Image 1 of 8
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model
2D
3D
Makes
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo 3d model

Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo

Created a more stylish 1x1x0.25 Multigrid Bin

As always, I opted for threaded installation so it will mount to the board more securely.

Print on the short 45-degree angle in the back with no supports at 0.2mm layer height with three walls for optimal strength.

Requires 2 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard, which may be obtained from "Keep Making" on Thangs.


13 Likes34 DownloadsJanuary 30, 2024