VANOCE | String Art Ball, Christmas Tree
The 3D string art ball from my collection of Christmas Tree decorations.
It prints 100% without supports, despite the strings floating in mid-air. Just make sure to check the recommended 3D print settings below.
My Christmas collection comprises:
- a tree top star of course, in string art style And 6 hanging accessories:
- 3D string art balls
- Flat christmas tree themed ball, in string art style
- Small **3D stars, in string art style
- Pine cones
- Little 3D trees
- Fast-printing snowflakes
You can get the silk copper PLA filament from Amazon here:
- For Europe: https://amzn.to/41mXSZq
- For America: https://amzn.to/41mXSZq
The black-rose-white silk rainbow PLA filament is from AMOLEN. You can buy it from Amazon here: For Europe: https://amzn.to/4ilQvYh For America: https://amzn.to/3ZGG7TJ
Happy printing!
DIMENSIONS | Ø 71 mm x H 87 mm
3D PRINT SETTINGS: The Ball prints upright. The STL file is already oriented properly No supports needed. No adhesion brim needed.
The only trick is to set the layer height to 0.3mm. You may have to set the "line width" to about 0.42mm and the "overhang speed" to 30mm/s. This is by default in Bambu Studio, but you may have to set it manually if you use other slicers and printers.
For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings.
Wall line count: 2 Layer height: 0.3mm/layer or less Infill: 15% top/bottom layer pattern: concentric Build adhesion type: None Supports: None