VANOCE | Hanging Star, String Art, Christmas Tree
byCharlesRegaud
VANOCE | Hanging Star, String Art, Christmas Tree
The small string-art hanging star from my collection of Christmas Tree decorations.
It prints 100% without supports, despite the strings floating in mid-air. Just make sure to check the recommended 3D print settings below.
My Christmas collection comprises:
- a tree top star of course, in string art style And 6 hanging accessories:
- 3D string art balls
- Flat christmas tree themed ball, in string art style
- Small **3D stars, in string art style
- Pine cones
- Little 3D trees
- Fast-printing snowflakes
Happy printing!
DIMENSIONS | Ø 100 mm x D 31 mm
3D PRINT SETTINGS: The star prints flat. The STL file is already oriented properly No supports needed. No adhesion brim needed.
The only trick is to set the layer height to 0.3mm. You may have to set the "line width" to about 0.42mm and the "overhang speed" to 30mm/s. This is by default in Bambu Studio, but you may have to set it manually if you use other slicers and printers.
For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings.
Wall line count: 2 Layer height: 0.3mm/layer or less Infill: 15% Build adhesion type: None Supports: None