CharlesRegaud
CharlesRegaud

SOAR | Table lamp E14 & E27 & E26 fast print

by
CharlesRegaud
CharlesRegaud
CharlesRegaud
CharlesRegaud
|
Image 1 of 13
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 13
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
2D
3D
Makes
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model
SOAR  |  Table lamp E14 & E27 & E26 fast print 3d model

SOAR | Table lamp E14 & E27 & E26 fast print

SOAR | Table lamp E14 & E27 & E26 fast print

Want to buy a physical 3D print of this product? Head to Trajann online store.

Textures, textures and textures again for this SOAR table lamp.

2 options for the shade:

  • plain (looks great printed with some fuzzy skin)
  • wicker weave with a twist (the weave pattern looks like it wraps around the shade in a spiral motion)

4 texture options for the base:

  • Fan pattern
  • Rocky pattern
  • Oak pattern
  • Tessellation pattern.

Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle, but 0.8mm to 1mm nozzles would work too as I made the wicker weave 1mm thick. The weave on some of my previous designs was only 0.45mm thick, and so could break and tear easily. This new 1mm weave is much stronger and prints much cleaner. (See print settings below)

This lamp works for E27, E26 and E14 socket screw thanks to a custom adapter you can twist n' clip (STL file provided).

You can get the power cords from Amazon here:
 For Europe: E27 cord:  https://amzn.to/3OVrZjK E14 cord:  https://amzn.to/3TchBqs

For the US: E26/E27 cord:  https://amzn.to/3U0Xyvy

Happy printing!

DIMENSIONS | Ø 208 mm x H 418 mm Shade height: 218mm. Base height: 200mm.

PRINTING | Shade ~3h | Stand ~2.5h

Bulbe socket | E14 or E27 or E26

Lightbulb socket hole diameters:

  • E14: Ø28mm
  • E27: Ø41mm

3D PRINT SETTINGS

All STL files are already oriented properly.

The only trick for the shade is to set the layer height to 0.3mm, since each weave line is 1.2mm thick, so is made of 4 layers.

For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings. Otherwise Bambu Studio will detect some of the weave layers as empty.

BASE & ADAPTER: Infill: 10 to 20% Wall line count: 2 top layers: 5 Bottom layers: 3 Layer height: 0.2 to 0.3mm or less (the bases in the pictures were printed in 0.3mm/layer) Build adhesion type: None Supports: None

SHADE: The shade prints in standard mode, not vase mode. Layer height: 0.3mm Wall line count: 2 Build adhesion type: None. But you can add a 5~6mm brim if you have adhesion issue. Supports: None Infill: None

The plain shade in the pictures was printed with some "fuzzy skin". The settings were:

  • fuzzy skin thickness: 0.2mm
  • fuzzy skin point distance: 0.6mm