SAN | Pendant Light E27 & E26 fast print

Meet the SAN pendant light, using 3D printed wickering technique. It is perfect as a dining room pendant.

Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below)

This lamp works with E27 and E26 socket screws.

It comes in 2 version/sizes. The large one has a diameter of 256mm. The smaller one has a diameter of 208mm.

You can get the power cords from Amazon here:
 For Europe: E27 cord:  https://amzn.to/3OVrZjK
 For the US: E26/E27 cord:  https://amzn.to/3V5VYJB

Some of you will wonder why the ring for the light bulbe in the middle of the top section looks like two half circle interlocking each other. The reason isn't mechanical, but I designed it this way to have a continuous inner loop, so a cleaner first layer and faster print. The printer doesn't have to create several loops and jump between them, leaving blobs and causing printing issues. Instead, the inner loop is all uninterrupted and will give you a much cleaner and faster first layer.

Happy printing!

DIMENSIONS (Large) | Ø 256 mm x H 200 mm DIMENSIONS (Small) | Ø 208 mm x H 200 mm

PRINTING | ~1h for each part

Bulbe socket | E27 or E26

3D PRINT SETTINGS The top section prints upside-up. The middle and bottom sections print upside-down. (the STL files are all already oriented properly) No need for supports, infill or brim.

For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings. Otherwise Bambu Studio will detect some of the weave layers as empty.

Layer height: 0.2 or 0.3mm/layer (lamps in the pictures were printed in 0.3mm/layer) Wall line count: 2 Build adhesion type: None. If you have adhesion issues, you can add a 5~6mm brim. Supports: None Infill: None